A Proposed Approach to the Revision of IEC 80001-1 Following Annex SL
نویسندگان
چکیده
منابع مشابه
The Approach to the Development of an Assessment Method for IEC 80001-1
IEC 80001-1 is a risk management standard that addresses the risks associated with the incorporation of a medical device into an IT network. Our research in the area of IEC 80001-1 has to date been focused on the development of a Process Reference Model (PRM) and Process Assessment Model (PAM) for assessment against IEC 80001-1. In this paper we present the approach to the next phase of our res...
متن کاملBasic requirements for proven-in-use arguments
IEC 61508-7 [1] includes as Annex D a proposal for the evaluation of software reliability based on a simple statistical model. However, this annex is discussed quite controversially and is currently under revision. EN 50129 [2] also contains recommendations on how to demonstrate high confidence by use, but without any further explanation. For example, for SIL 3 and 4, “1 million hours operation...
متن کاملTowards a Process Assessment Model for IEC 80001-1
Medical Devices are widely used in patient care for both diagnosis and treatment purposes. Typically, modern medical devices are intended to be networked at their point of use. The incorporation of medical devices opens up new opportunities and new vulnerabilities to patients and medical facilities. In 2010, the first standard to address the risks of incorporating a medical device into an IT ne...
متن کاملComparative Reliability Analysis of Substation Automation Architecture Based on IEC 61850 Standard
Using IEC 61850 standard would increase the reliability and availability of electricity network and put a huge impact on network automation. Even though much research works has been done in substation system reliability, there is a few works in automated substation control system reliability. This paper evaluates the reliability of substation automation system based IEC 61850 comparatively cons...
متن کاملFatal Cobalt Cardiomyopathy Following Revision Total Hip Arthroplasty – A Brief Report with Review of Literature
Ceramic bearing surfaces are being increasingly used in young patients undergoing total hip arthroplasty. However,failures have been reported including fractures even with the newer third generation ceramics. The recommendedtreatment for fracture of ceramic bearing surfaces is complete synovectomy and revision total hip arthroplasty.However, disappointing results have also bee...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
عنوان ژورنال:
دوره شماره
صفحات -
تاریخ انتشار 2017