Nonlinear Effect of Initial Stress between Similar and Dissimilar

نویسنده

  • M. A. BIOT
چکیده

The theory of crack propagation in orthotropic media is developed by applying the theory of incremental deformations in the vicinity of a state of initial stress. This is carried out in the context of a new approach to analytical methods and a physical analysis which takes into account plastic deformation under prestress. The state of initial stress is triaxial along the directions of elastic symmetry, and the crack is parallel to these directions. An additional shear component for the initial stress is also taken into account and general conditions are derived for crack propagation, including the case of fluid injection into the crack. The analysis is first carried out for an homogeneous medium. The nonlinear influence of the initial stress appears in two ways: first, through a fundamental purely elastic effect related to the occurrence of surface instability, and second, through the influence of the initial stress on plastic behavior. The particular cases of an isotropic elastic medium with finite initial strain and an orthotropic incompressible medium are discussed. The analysis is extended to a crack between dissimilar orthotropic media with initial stress. The method of analysis leads to a number of simplifications and brings out new properties of the solutions for this type of problem. For incompressible media without initial stress, the typical oscillatory behavior disappears. Uniqueness of the solutions is also derived.

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Study of Love Waves in a Clamped Viscoelastic Medium with Irregular Boundaries

A mathematical model is presented to investigate the effects of sandiness, irregular boundary interfaces, heterogeneity and viscoelasticity on the phase velocity of Love waves. Geometry of the problem is consisting of an initially stressed viscoelastic layer with corrugated irregular boundaries, which is sandwiched between heterogeneous orthotropic semi-infinite half-space with initial stress a...

متن کامل

Wave Propagation in Fibre-Reinforced Transversely Isotropic Thermoelastic Media with Initial Stress at the Boundary Surface

The reflection and transmission of thermoelastic plane waves at an imperfect boundary of two dissimilar fibre-reinforced transversely isotropic thermoelastic solid half-spaces under hydrostatic initial stress has been investigated. The appropriate boundary conditions are applied at the interface to obtain the reflection and transmission coefficients of various reflected and transmitted waves wi...

متن کامل

Assessing different nonlinear analysis methods for free vibrations of initially stressed composite laminated plates

In this paper, the nonlinear free vibrations of thin symmetric and non-symmetric cross-ply composite plates subjected to biaxial initial stresses are investigated. Because of their excellent properties such as specific strength and specific stiffness, composite plates have wide applications in aerospace and mechanical structures. Based on Von-Karman's strain-displacement relations and using Gal...

متن کامل

Effect of nanoparticles addition on dissimilar joining of aluminum alloys by friction stir welding

The purpose of this study was to examine the effect of adding Nano particles such as Nano Carbon Tube during Friction Stir Welding (FSW) on dissimilar Al alloy joints. More specifically, both FSW and Friction Stir Processing (FSP) were performed simultaneously to investigate the effect of adding Nano particles on mechanical properties and microstructure of the weld zone for joining AA5754-H22 a...

متن کامل

Investigation of failure mode of similar and dissimilar joint of duplex stainless steel bye resistance spot welding in Shear-tensile conditions

The present study investigates the failure resistance welding method of a similar and unmatched connection point in duplex stainless steel under shear stress conditions. In this study, 1Cr21Ni5Ti branded stainless steel duplex was used. Micro-hardness test, tensile test - cutting and optical metallography to describe the macrostructure and microstructure, hardness button welding and weld failur...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

عنوان ژورنال:

دوره   شماره 

صفحات  -

تاریخ انتشار 1972