Physical Modelling of Removing Hydrogen from Liquid Aluminium Conducted in Urc-7000 Reactor
نویسنده
چکیده
M. Saternus, T. Merder, J. Pieprzyca: Silesian University of Technology, Department of Metallurgy, Katowice, Poland The research which visualizes the process of argon blowing through modelling agent in continuous URC-7000 reactor was carried out. Physical model was built according to the theory of similarity. Additionally, the measurements of modelling agent c onductivity w ere done . A s a c onsequence the obtained r esults enabled t o det ermine the change of tracer concentration in the volume of the reactor.
منابع مشابه
Physical Model of Aluminium Refining Process in Urc-7000
In metallurgy the quality of the liquid metal has the biggest influence on the quality of the final products. The amount of metallic and non-metallic impurities has great impact on the consecutive stages of technological processes such as: casting, plastic working, heat treatment, etc. That is why the refining process is considered to be one of the most important parts of the basic technologica...
متن کاملModelling Research of Hydrogen Desorption from Liquid Aluminium and Its Alloys
Barbotage is one of the most universal methods used for refining process of aluminium and its alloys. In this process tiny gas bubbles are generated and during their rising up to the surface the hydrogen is removed. In the same time some inclusions such as sodium, calcium and non-metallic particles, like oxides or borides can be also eliminated from the liquid metal due to flotation 1 . There a...
متن کاملDynamic modelling of hardness changes of aluminium nanostructure during mechanical ball milling process
In this research, the feasibility of using mathematical modelling in the ball milling process has been evaluated to verify the hardness changes of an aluminium nanostructure. Considering the model of normal force displacement (NFD), the radius of elastic-plastic and normal displacement of two balls were computed by applying analytical modelling and coding in MATLAB. Properties of balls and alum...
متن کاملPerformance of Biological hydrogen Production Process from Synthesis Gas, Mass Transfer in Batch and Continuous Bioreactors
Biological hydrogen production by anaerobic bacterium, Rhodospirillum rubrum was studied in batch and continuous bioreactors using synthesis gas (CO) as substrate. The systems were operated at ambient temperature and pressure. Correlations available in the literature were used to estimate the gas-liquid mass transfer coefficients (KLa) in batch reactor. Based on experimental results for the con...
متن کاملCfd Modelling of a Novel Stirred Reactor for the Bio- Production of Hydrogen
In this work the Computational Fluid Dynamics simulation of a stirred bioreactor purposely designed for the production of hydrogen from organic wastes fermentation is presented. The bioreactor is a vortex-ingesting, dual impeller, mechanically-agitated vessel equipped with a central draft tube. Due to the geometrical and physical complexity, the selected reactor offers a very challenging benchm...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
عنوان ژورنال:
دوره شماره
صفحات -
تاریخ انتشار 2013