Response of frictional receding contact problems to cyclic loading
نویسندگان
چکیده
Dundurs [Properties of elastic bodies in contact. In: de Pater AD, Kalker JJ, editors. The mechanics of the contact between deformable bodies. Delft: Delft University Press; 1975. p. 54–66] has shown that if the contact area in a frictionless elastic system under load is equal to or smaller than that before loading (i.e. the contact is receding), the extent of the contact area is load-independent and the stress field varies linearly with load. Similar results apply to problems with Coulomb friction as long as the loading is monotonic, but otherwise non-linearities and variation in the contact area occur. In this paper, we examine this effect for the simple case of an elastic block pressed against a frictional rigid plane. During unloading there is continuous variation of both contact and slip/stick boundaries. For the important case where the loading contains a mean and a periodic component, the system approaches a steady periodic state relatively slowly and in this final state there is continuous variation of the contact area, with the minimum (i.e. the maximum amount of separation) occurring at the minimum applied load. & 2008 Elsevier Ltd. All rights reserved.
منابع مشابه
System identification of a beam with frictional contact
The nonlinear system becomes an area with numerous investigations over the past decades. The conventional modal analysis could not be applied on nonlinear continuous system which makes it impossible to construct the reduced order models and obtain system response based on limited number of measurement points. Nonlinear normal modes provide a useful tool for extending modal analysis to nonlinea...
متن کاملPredicting Depth and Path of Subsurface Crack Propagation at Gear Tooth Flank under Cyclic Contact Loading
In this paper, a two-dimensional computational model is proposed for predicting the initiation position and propagation path of subsurface crack of spur gear tooth flank. In order to simulate the contact of teeth, an equivalent model of two contacting cylinders is used. The problem is assumed to be under linear elastic fracture mechanic conditions and finite element method is used for numerical...
متن کاملDeformation, structural changes and damage evolution in nanotwinned copper under repeated frictional contact sliding
Nanotwinned metals have the potential for use as structural materials by virtue of having a combination of high strength as well as reasonable ductility and damage tolerance. In the current study, the tribological response of nanotwinned copper has been characterized under conditions of repeated frictional sliding contact with a conical tip diamond indenter. Pure ultrafine-grained copper specim...
متن کاملSeismic response sensitivity of the structures equipped with cylindrical frictional dampers to the value of slippage load
Cylindrical Frictional Damper (CFD) is a new revolutionary frictional based mechanical damper. Unlike the other types of frictional dampers, CFDs do not utilize bolts to produce friction between contact surfaces. These dampers consist of two main parts, the inner shaft and the external cylinder. These two parts are assembled such that one is shrink-fitted inside the other. In this investigation...
متن کاملShakedown in elastic contact problems with Coulomb friction
Elastic systems with frictional interfaces subjected to periodic loading are sometimes predicted to ‘shake down’ in the sense that frictional slip ceases after the first few loading cycles. The similarities in behaviour between such systems and monolithic bodies with elastic–plastic constitutive behaviour have prompted various authors to speculate that Melan’s theorem might apply to them – i.e....
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
عنوان ژورنال:
دوره شماره
صفحات -
تاریخ انتشار 2008