A Two-Step Approach for Analytical Optimal Hedging with Two Triggers

نویسندگان

  • Tiesong Hu
  • Xu-Zhao Zhang
  • Xiang Zeng
  • Jing Wang
چکیده

Hedging is widely used to mitigate severe water shortages in the operation of reservoirs during droughts. Rationing is usually instituted with one hedging policy, which is based only on one trigger, i.e., initial storage level or current water availability. It may perform poorly in balancing the benefits of a release during the current period versus those of carryover storage during future droughts. This study proposes a novel hedging rule to improve the efficiency of a reservoir operated to supply water, in which, based on two triggers, hedging is initiated with three different hedging sub-rules through a two-step approach. In the first step, the sub-rule is triggered based on the relationship between the initial reservoir storage level and the level of the target rule curve or the firm rule curve at the end of the current period. This step is mainly concerned with increasing the water level or not in the current period. Hedging is then triggered under the sub-rule based on current water availability in the second step, in which the trigger implicitly considers both initial and ending reservoir storage levels in the current period. Moreover, the amount of hedging is analytically derived based on the Karush–Kuhn–Tucker (KKT) conditions. In addition, the hedging parameters are optimized using the improved particle swarm optimization (IPSO) algorithm coupled with a rule-based simulation. A single water-supply reservoir located in Hubei Province in central China is selected as a case study. The operation results show that the proposed rule is reasonable and significantly improves the reservoir operation performance for both long-term and critical periods relative to other operation policies, such as the standard operating policy (SOP) and the most commonly used hedging rules.

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

DETERMINATION OF OPTIMAL HEDGING RULE USING FUZZY SET THEORY FOR MULTI-RESERVOIR OPERATION

To deal with severe drought when water supply is insufficient hedging rule, based on hedging rule curve, is proposed. In general, in discrete hedging rules, the rationing factors have changed from a zone to another zone at once. Accordingly, this paper is an attempt to improve the conventional hedging rule to control the changes of rationing factors. In this regard, the simulation model has emp...

متن کامل

Optimal Pareto Parametric Analysis of Two Dimensional Steady-State Heat Conduction Problems by MLPG Method

Numerical solutions obtained by the Meshless Local Petrov-Galerkin (MLPG) method are presented for two dimensional steady-state heat conduction problems. The MLPG method is a truly meshless approach, and neither the nodal connectivity nor the background mesh is required for solving the initial-boundary-value problem. The penalty method is adopted to efficiently enforce the essential boundary co...

متن کامل

Finding the Optimal Place of Sensors for a 3-D Damped Wave Equation by using Measure Approach

In this paper‎, ‎we model and solve the problem of optimal shaping and placing to put sensors for a 3-D wave equation with constant damping in a bounded open connected subset‎ ‎of 3-dimensional space‎. ‎The place of sensor is modeled by a subdomain‎ ‎of this region of a given measure‎. ‎By using an approach based on the embedding process‎, ‎first‎, ‎the system is formulated in variational form;...

متن کامل

Optimization of Online induction Sensor for Ferrous Metals Particles Identification in Engine Oil

Engine oil is one of most important parameters in internal combustion engine that plays effective role in component wear. One of the ways to optimize the performance of the IC engines is online monitoring of wear particle in engine oil. There are different ways to identifying these particles, most of which are offline. Nowadays online oil monitoring sensors are quickly developed. In this study ...

متن کامل

Analytical and numerical approaches for the control of manufacturing systems with a multi-level, production dependent failure rate

We consider a fluid model, single machine single product manufacturing system subject to failures. The failure/repair process is Markov non-homogeneous since the failure rate depends on the production rate through an increasing, multi-level, piecewise constant function. If the failure rate was independent of the production rate, the control minimizing a long term average expected cost including...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

عنوان ژورنال:

دوره   شماره 

صفحات  -

تاریخ انتشار 2016