Broadband and Low Profile Antenna for Uhf Band
نویسندگان
چکیده
The requirement of wideband and compact devices is ever increasing in most communication systems. In addition, recent increases in the transmission and reception of information have created a need for broadband and low profile antennas. This necessity is particularly challenging in designing Radio Frequency (RF) products that demand these features at low RF bands. There are numerous situations in which environmental considerations and application require the antenna to also be low-profile.
منابع مشابه
طراحی،تحلیل و ساخت آنتن دو بانده برای یک ماهواره LEO کوچک
Separated Turnstile (ST) Antenna has many applications in small Low Earth Orbit (LEO) satellites. Ability of dual-band operation and circular polarization are the main features of this antenna. The purpose of this paper is design and analysis of a Separated Turnstile antenna, which can work in UHF and VHF band simultaneously. The antenna has saddle-shaped radiation pattern in UHF band for data ...
متن کاملA Broadband UHF Tag Antenna for Near-Field and Far-Field RFID Communications
The paper deals with the design of passive broadband tag antenna for Ultra-High Frequency (UHF) band. The antenna is intended for both near and far fields Radio Frequency Identification (RFID) applications. The meander dipole tag antenna geometry modification is designed for frequency bandwidth increasing. The measured bandwidth of the proposed broadband tag antenna is more than 140 MHz (820–96...
متن کاملA Broadband UHF Antenna on a Non - UniformAperiodic ( NUA ) EBG Surface Report
A new concept to design thin directional broadband antennas on EBG or HIS surfaces is proposed. Using our proposed concept an octave or more bandwidth is obtained with fairly thin EBG structures even at UHF frequencies allowing low profile antenna design and development. At the heart of the proposed scheme lies the concept of a non-uniform aperiodic EBG surface where the EBG patch size and thei...
متن کاملBroadband Stacked Microstrip Patch Antenna for L-Band Operation: FDTD Modeling
This paper presents a novel implementation of an electromagnetically coupled patch antenna using air gap filled substrates to achieve the maximum bandwidth. We also propose an efficient modeling technique using the FDTD method which can substantially reduce the simulation cost for modeling the structure. The simulated results have been compared with measurement to show the broadband behavio...
متن کاملDesign of Coaxial fed Spiral - Slot Microstrip Patch Antenna for DTV Reception with Shorting Plates
In this paper a novel design of small sized, low profile coaxial fed microstrip patch antenna is proposed for terrestrial DTV signal reception applications in the UHF band frequency range of 540-890MHz. Designed model was spiral slot microstrip patch antenna using shorting plates for size reduction. Different parameters like return loss, VSWR, gain along θ, Ø directions, radiation pattern in 2D...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
عنوان ژورنال:
دوره شماره
صفحات -
تاریخ انتشار 2011