POD reduced-order unstructured mesh modelling applied to 2D and 3D fluid flow

A new scheme for implementing a reduced order model for complex meshbased numerical models (e.g. finite element unstructured mesh models), is presented. The matrix and source term vector of the full model are projected onto the reduced bases. The proper orthogonal decomposition (POD) is used to form the reduced bases. The reduced order modelling code is simple to implement even with complex governing equations, discretization methods and non-linear parameterizations. Importantly, the model order reduction code is independent of the implementation details of the full model code. For nonlinear problems, a perturbation approach is used to help accelerate the matrix equation assembly process based on the assumption that the discretized system of equations has a polynomial representation and can thus be created by a summation of pre-formed matrices. In this paper, by applying the new approach, the POD reduced order model is implemented on an unstructured mesh finite element fluid flow model, and is applied to 3D flows. The error between the full order finite element solution and the reduced order model POD solution is estimated. The feasibility and accuracy of the reduced order model applied to 3D fluid flows are demonstrated.