Model for performance prediction in multi-axis machining
نویسنده
چکیده
This paper deals with a predictive model of kinematical performance in 5-axis milling within the context of High Speed Machining. Indeed, 5-axis high speed milling makes it possible to improve quality and productivity thanks to the degrees of freedom brought by the tool axis orientation. The tool axis orientation can be set efficiently in terms of productivity by considering kinematical constraints resulting from the set machine-tool/NC unit. Capacities of each axis as well as some NC unit functions can be expressed as limiting constraints. The proposed model relies on each axis displacement in the joint space of the machine-tool and predicts the most limiting axis for each trajectory segment. Thus, the calculation of the tool feedrate can be performed highlighting zones for which the programmed feedrate is not reached. This constitutes an indicator for trajectory optimization. The efficiency of the model is illustrated through examples. Finally, the model could be used for optimizing process planning.
منابع مشابه
Kinematical performance prediction in multi-axis machining for process planning optimization
This paper deals with a predictive model of kinematical performance in 5-axis milling within the context of High Speed Machining. Indeed, 5-axis high speed milling makes it possible to improve quality and productivity thanks to the degrees of freedom brought by the tool axis orientation. The tool axis orientation can be set efficiently in terms of productivity by considering kinematical constra...
متن کاملAn Instantaneous Rigid Force Model For 3-Axis Ball-End Milling Of Sculptured Surfaces
An instantaneous rigid force model for prediction of cutting forces in ball-end milling of sculptured surfaces is presented in this paper. A commercially available geometric engine is used to represent the cutting edge, cutter and updated part geometries. The cutter used in this work is an insert type ball-end mill. Intersecting an inclined plane with the cutter ball nose generates the cutting...
متن کاملAdaptive Fuzzy Sliding Controller with Dynamic Compensation for Multi-Axis Machining
The precision of multi-axis machining is deeply influenced by the tracking error of multi-axis control system. Since the multi-axis machine tools have nonlinear and time-varying behaviors, it is difficult to establish an accurate dynamic model for multi-axis control system design. In this paper, a novel adaptive fuzzy sliding model controller with dynamic compensation is proposed to reduce trac...
متن کاملKinematic modelling of a 3-axis NC machine tool in linear and circular interpolation
Machining time is a major performance criterion when it comes to high speed machining. CAM software can help in estimating that time for a given strategy. But in practice, CAM programmed feed rates are rarely achieved, especially where complex surface finishing is concerned. This means that machining time forecasts are often more than one step removed from reality. The reason behind this is tha...
متن کاملModel for the prediction of 3D surface topography in 5-axis milling
The paper deals with the prediction of the 3D surface topography obtained in 5-axis milling in function of the machining conditions. For this purpose, a simulation model for the prediction of machined surface patterns is developed based on the well-known N-buffer method. As in sculptured surface machining the feed rates locally vary, the proposed model can be coupled to a feed rate prediction m...
متن کامل