Holdoff Algorithms for IEEE 802.16 Mesh Mode in Multi-hop Wireless Mesh Networks
نویسندگان
چکیده
Multi-hop wireless mesh networks (M-WMNs) [Akyildiz, I. F., 2005] are one of the key features of beyond 3G systems because of their flexibility and low-cost deployment. So far, most of existing studies on multi-hop wireless mesh networks have been accomplished based on the IEEE 802.11 ad hoc mode. The IEEE 802.16 working group (WG) specified the IEEE 802.16-2004 standard [IEEE Std. 802.16-2004, 2004] in October 2004 and the standard defined two modes: the point-to-multi-point (PMP) mode and the mesh mode. The IEEE 802.16 mesh standard defines three mechanisms to schedule the data transmission: centralized scheduling (CSCH) [Morge, P. S., 2007], [Han, B., 2007], coordinated distributed scheduling (C-DSCH) [Morge, P. S., 2007], and uncoordinated distributed scheduling (UnDSCH). In the IEEE 802.16 mesh mode with the CSCH, C-DSCH, and Un-DSCH, multi-hop communication is possible between nodes such as mesh base stations (MeshBSs) and mesh subscriber stations (MeshSSs) because all nodes are peers and each node can act as routers to support multi-hop packet forwarding. In particular, in the IEEE 802.16 mesh mode with the C-DSCH, every node competes for channel access using a distributed election algorithm (DEA) based on the scheduling information of the extended neighborhoods (one-hop and two-hop neighbors) in a completely distributed manner and reserves radio resource by a three-way handshaking mechanism in which nodes request, grant, and confirm available radio resource using mesh distributed scheduling (MSH-DSCH) message. Like this, because the IEEE 802.16 mesh mode with the C-DSCH has good flexibility and scalability, it is suitable as an alternative medium access control (MAC) protocol for establishing M-WMNs. For M-WMNs to serve as a wireless network infrastructure, the protocol design for M-WMN should target a high network throughput. In the IEEE 802.16 mesh mode with the C-DSCH, after occupying radio resource, a node cannot transmit any MSH-DSCH message for a holdoff time in order to share radio resource with other nodes in M-WMN. If nodes get a short holdoff time in a heavily loaded network situation, the competition between nodes will happens severe and thus they will experience long contention times before reserving radio resource. On the other hand, if nodes get a long holdoff time in a lightly loaded
منابع مشابه
WiMsh: a simple and efficient tool for simulating IEEE 802.16 wireless mesh networks in ns-2
Wireless mesh networks (WMNs) are two-tier wireless multihop networks. The top tier is made of wireless routers, which provide access to the wireless clients in the bottom tier. One technology for enabling multi-hop communication in the top tier is IEEE 802.16, which includes a mesh mode, in addition to the Point-to-Multipoint mode for cellular networks. As is often the case with wireless netwo...
متن کاملFairness resource allocation and scheduling for IEEE 802.16 Mesh networks
The IEEE 802.16 standard provides a scheme for creating multi-hop relay networks, which can be deployed as a high speed wide area wireless network at low cost. Although the standard defines signaling mechanisms in mesh mode, however, it doesn’t specify wireless resource management in the protocol. In this paper, we address the problem of resource allocation with the goal of providing fairness a...
متن کاملEfficient Design of Wimax/802.16 Mesh Networks
Efficient Design of WiMAX/802. 1 6 Mesh Networks. Jad El-Najjar, Ph.D. Concordia University, 2010 Broadband wireless networks are becoming increasingly popular due to their fast and inexpensive deployment and their capabilities of providing flexible and ubiquitous Internet access. While the majority of existing broadband wireless networks are still exclusively limited to single hop access, it i...
متن کاملDesigning an Efficient Delay Sensitive Routing Metric for IEEE 802.16 Mesh Networks
Quality of Service provisioning is one of the major design goals of IEEE 802.16 mesh networks. In order to provide quality delivery of delay sensitive services such as voice, video etc., it is required to route such traffic over a minimum delay path. In this paper we propose a routing metric for delay sensitive services in IEEE 802.16 mesh networks. We design a new cross layer routing metric, n...
متن کاملA Proportionally Fair Centralized Scheduler Supporting Spatial Minislot Reuse for IEEE 802.16 Mesh Networks
Mesh and relay networks promise to increase the reach, capacity, and throughput of wireless communication networks. As a prominent example, the reservation-based IEEE 802.16 standard (as the basis for Worldwide Interoperability for Microwave Access WiMAX) comes with basic protocol mechanisms for an optional mesh mode as well as a relay mode of operation. This paper proposes a proportionally fai...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
عنوان ژورنال:
دوره شماره
صفحات -
تاریخ انتشار 2012