A CAD-based Tool for FDM and FEM Radiation and Conduction Modeling
نویسندگان
چکیده
Thermal engineering has long been left out of the concurrent engineering environment dominated by CAD (computer aided design) and FEM (finite element method) software. Current tools attempt to force the thermal design process into an environment primarily created to support structural analysis, which results in inappropriate thermal models. As a result, many thermal engineers either build models “by hand” or use geometric user interfaces that are separate from and have little useful connection, if any, to CAD and FEM
منابع مشابه
Prediction of Service Life in Concrete Structures based on Diffusion Model in a Marine Environment using Mesh Free, FEM and FDM Approaches
Chloride-induced corrosion is a key factor in the premature corrosion of concrete structures exposed to a marine environment. Fick's second law of diffusion is the dominant equation to model diffusion of chloride ions. This equation is traditionally solved by Finite Element Method (FEM) and Finite Difference Method (FDM). Although these methods are robust and efficient, they may face some numer...
متن کاملThree-dimensional modeling of transport phenomena in a planar anode-supported solid oxide fuel cell
In this article three dimensional modeling of a planar solid oxide fuel cell (SOFC) was investigated. The main objective was to attain the optimized cell operation. SOFC operation simulation involves a large number of parameters, complicated equations, (mostly partial differential equations), and a sophisticated simulation technique; hence, a finite element method (FEM) multiphysics approach ...
متن کاملAutomating Thermal Analysis with Thermal DesktopTM
Thermal analysis is typically executed with multiple tools in a series of separate steps for performing radiation analysis, generating conduction and capacitance data, and for solving temperatures. This multitude of programs often leads to many user files that become unmanageable with their multitude, and the user often looses track as to which files go with which cases. In addition to combinin...
متن کاملHeat and Mass Transfer in Industrial Biscuit Baking Oven and Effect of Temperature on Baking Time
This research deals with heat and mass transfer in biscuit industrial baking ovens. In these ovens, heat reaches biscuits indirectly by radiation, convection and conduction. The method for numerical solution is that we first provide the related equations, then they are discretized by finite difference method (FDM), and finally, after encoding and writing a program for the computer, we run it. T...
متن کاملProbe-Fed Rectangular Dielectric Resonator Antennas,Theoretical Modeling and Experiments
A Rectangular Dielectric Resonator Antenna (RDRA) is theoretically analyzed using the Conventional Dielectric Waveguide Model (CDWM), numerically simulated using the High Frequency Structure Simulator (HFSS) based on the Finite Element Method (FEM) software package and experimentally investigated with the consideration of the fundamental mode TE 111. Antenna parameters under investigation inclu...
متن کامل