Analysis of Cracks in Adhesively Bonded Metallic Laminates by a 3-dimensional Assumed Stress Hybrid Fem
نویسنده
چکیده
A three-dimensional analysis of cracks in adhesively bonded laminates, with debonding around the crack, is presented. The three-dimensional finite element method is based on a hybrid-stress procedure. Effects of the following parametricvariations are studied: (i) relative thicknesses of adhesives, (ii) relative material properties of adhesives and adherends, (iii) ratio of flaw length, to laminate characteristic dimensions, and (iv) shape of debonded region.
منابع مشابه
Viscoelastic analysis of stress distribution in balanced and unbalanced adhesively bonded single-lap joints with functionally graded adherends under the Reddy model
In this study, shear and peel stress distributions in the viscoelastic adhesive layer of a single-lap joint (SLJ) with functionally graded (FG) adherends are investigated. The study focuses on the effect of different adherend profiles and material composition on the time-dependent stress concentration/distribution in balanced and unbalanced SLJs. For this purpose, the Reddy model is applied to ...
متن کاملNumerical Analysis of Directionally Unstable Crack Propagation in Adhesively Bonded Joints
This paper investigates the directional stability of crack propagation in adhesively bonded joints. First, an analytical model analyzing the energy balance during the crack propagation in double cantilever beam (DCB) specimens is presented, and the directional stability of cracks is predicted. The results are consistent with the analytical predictions made by Fleck, Hutchinson, and Suo [1] usin...
متن کاملAnalytical Solution of Stress Field in Adhesively Bonded Composite Single-Lap Joints Under Mechanical Loadings
In this paper, considering an adhesively bonded composite single-lap joint, a novel approach is presented to predict the peel and shear stress distributions of the adhesive layer for an ASTM standard test sample. In current method, the equilibrium equations are derived using the energy method and based on the Timoshenko’s beam theory. Two solution procedures then are discussed, one of which rep...
متن کاملStress analysis of hybrid joints of metal and composite plates via 3D-FEM
Three-dimensional finite element models are developed to investigate the effects of both tensile load and uniform temperature load on the stresses in hybrid joints. During the solution of the problem, finite element method (FEM) is preferred, as this method is very suitable for solving many engineering problems. An aluminum sheet is bonded a composite sheet. Hybrid joints are designed from both...
متن کاملStrength Prediction of Adhesively-bonded Scarf Repairs in Composite Structures under Bending
This work reports on the experimental and numerical study of the bending behaviour of two-dimensional adhesively-bonded scarf repairs of carbon-epoxy laminates, bonded with the ductile adhesive Araldite 2015. Scarf angles varying from 2 to 45o were tested. The experimental work performed was used to validate a numerical Finite Element analysis using ABAQUS and a methodology developed by the aut...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
عنوان ژورنال:
دوره شماره
صفحات -
تاریخ انتشار 2004