CFD Investigation of Resistance of High-Speed Trimaran Hull Forms
نویسندگان
چکیده
............................................................................................... iii Table of
منابع مشابه
Resistance Prediction for a Novel Trimaran with Wave Piercing Bow
Nowadays, application of high speed crafts with large tonnage is of our country's essences. In order to gain high speed, new multi hull crafts are traditional. A hull form having been used recently in frigates is the Trimaran. Trimaran hull form and motion have been extensively studied due to the development of numerical and analytical methods as well as the exploitation of experimental setup. ...
متن کاملNumerical Investigation on the Effect of Tunnel Height on Drag Reduction in a High Speed Trimaran
There are different methods to reduce drag in high speed hulls. One of these methods is a change in the shape of the body by adding longitudinal side tunnels. In this paper it has been attempted to determine the influence of the tunnel height on hydrodynamic characteristics of the hull to achieving an optimum shape for the tunnel. To achieve this purpose, numerical simulation of the problem has...
متن کاملCFD Analysis on the Bare Hull Form of Submarines for Minimizing the Resistance
In this paper, a CFD analysis on the bare hull form of submarines or torpedoes for minimizing the resistance is represented. There are several parameters in submarine form design which the most important parameter is resistance. All operational characteristics of submarines are related to the resistance, related required power and then, underwater speed and range. Other parameters are only ment...
متن کاملExperimental and CFD Study of Wave Resistance of High-Speed Round Bilge Catamaran Hull Forms
Although catamaran configuration has been around for a longtime, it is only in the recent past that such hull forms have seen unprecedented growth in the high-speed ferry industry. One of the design challenges faced by naval architects is accurate prediction of the hydrodynamic characteristics of such vessels primarily in the areas of resistance, propulsion and seakeeping. Even though considera...
متن کاملInvestigation of stepped planning hull hydrodynamics using computational fluid dynamics and response surface method
The use of step at the bottom of the hull is one of the effective factors in reducing the resistance and increasing the stability of the Planning hull. The presence of step at the bottom of this type of hulls creates a separation in the flow, which reduces the wet surface on the hull, thus reducing the drag on the body, as well as reducing the dynamic trim. In this study, a design space was cre...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
عنوان ژورنال:
دوره شماره
صفحات -
تاریخ انتشار 2015