Sources and fluxes of scale-energy in the overlap layer of wall turbulence

نویسندگان

  • A. Cimarelli
  • E. De Angelis
چکیده

Direct Numerical Simulations of turbulent channel flows at friction Reynolds number 550, 1000, 1500, are used to analyse the turbulent production, transfer and dissipation mechanisms in the compound space of scales and wall-distances by means of the Kolmogorov equation generalized to inhomogeneous anisotropic flows. Two distinct peaks of scaleenergy source are identified. The first stronger one belongs to the nearwall cycle. Its location in the space of scales and physical space is found to scale in viscous units while its intensity grows slowly with Re, indicating a near-wall modulation. The second source peak is found further away from the wall in the putative overlap layer and it is separated from the near-wall source by a layer of significant scale-energy sink. The dynamics of the second outer source appears to be strongly dependent on the Reynolds number. The detailed scale-by-scale analysis of this source highlights well-defined features that are used to make the properties of the outer turbulent source independent of Reynolds number and wall-distance by rescaling the problem. Overall, the present results suggest a strong connection of the observed outer scale-energy source with the presence of an outer region of turbulence production whose mechanisms are well separated from the near-wall region and whose statistical features agree with the hypothesis of an overlap layer dominated by attached eddies. Inner-outer interactions between the near-wall and outer source region in terms of scale-energy fluxes are also analysed. It is conjectured that the near-wall modulation of the statistics at increasing Reynolds number can be related to a confinement of the near-wall turbulence production due to the presence of increasingly large production scales in the outer scale-energy source region.

برای دانلود رایگان متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Large-eddy simulation of turbulent flow over an array of wall-mounted cubes submerged in an emulated atmospheric boundary-layer

Turbulent flow over an array of wall-mounted cubic obstacles has been numerically investigated using large-eddy simulation. The simulations have been performed using high-performance computations with local cluster systems. The array of cubes are fully submerged in a simulated deep rough-wall atmospheric boundary-layer with high turbulence intensity characteristics of environmental turbulent fl...

متن کامل

Simultaneous estimation of heat fluxes applied to the wall of a channel with turbulent flow using inverse analysis

The main purpose of this study is to estimate the step heat fluxes applied to the wall of a two-dimensional symmetric channel with turbulent flow. For inverse analysis, conjugate gradient method with adjoint problem is used. In order to calculate the flow field,   two equation model is used. In this study, adjoint problem is developed to conduct an inverse analysis of heat transfer in a channel...

متن کامل

Numerical Modeling of Turbulent Processes in outflow of the Persian Gulf

In this study, measured hydrophysical data collected by the University of Miami researchers from the southern part of the Strait of Hormuz during the period December 1996 to March 1998 and climate data from the Qeshm island meteorological station were used to simulate water column turbulence south of the Qeshm Island, via General Ocean Turbulence Model (GOTM). The model does not use slip and fl...

متن کامل

Numerical Simulation of Separation Bubble on Elliptic Cylinders Using Three-equation k-? Turbulence Model

Occurrence of laminar separation bubbles on solid walls of an elliptic cylinder has been simulated using a recently developed transitional model for boundary layer flows. Computational method is based on the solution of the Reynolds averaged Navier-Stokes (RANS) equations and the eddy-viscosity concept. Transitional model tries to simulate streamwise fluctuations, induced by freestream turbulen...

متن کامل

Study of Parameters Affecting Separation Bubble Size in High Speed Flows using k-ω Turbulence Model

Shock waves generated at different parts of vehicle interact with the boundary layer over the surface at high Mach flows. The adverse pressure gradient across strong shock wave causes the flow to separate and peak loads are generated at separation and reattachment points. The size of separation bubble in the shock boundary layer interaction flows depends on various parameters. Reynolds-averaged...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

عنوان ژورنال:

دوره   شماره 

صفحات  -

تاریخ انتشار 2017