Craters Formed in Granular Beds by Impinging Jets of Gas
نویسندگان
چکیده
When a jet of gas impinges vertically on a granular bed and forms a crater, the grains may be moved by several different mechanisms: viscous erosion, diffused gas eruption, bearing capacity failure, and/or diffusion-driven shearing. The relative importance of these mechanisms depends upon the flow regime of the gas, the mechanical state of the granular material, and other physical parameters. Here we report research in two specific regimes: viscous erosion forming scour holes as a function of particle size and gravity; and bearing capacity failure forming deep transient craters as a function of soil compaction.
منابع مشابه
Heat Transfer under Double Turbulent Pulsating Jets Impinging on a Flat Surface
In this study, the numerical analysis of turbulent flow and heat transfer of double pulsating impinging jets on a flat surface has been investigated. The unsteady two-dimensional numerical solution for two similar and dissimilar jets was performed using the RNG k-ε model. The results showed that the RNG k-ε model has more satisfactory predictions of the Nusselt number distribution. Comparisons ...
متن کاملNumerical investigation of thermal mixing of shear thinning fluids in one-way opposing jets
In recent years, impinging streams have received increasing interest for their high efficiency in heat and mass transfer. This numerical study was conducted to investigate flow and heat transfer characteristics of one-way opposing jets of non-Newtonian fluids. Effects of Reynolds number impinging angle, momentum ratio and flow behavior index on mixing index were evaluated. The results showed im...
متن کاملEvaluation of Eulerian Two-Fluid Numerical Method for the Simulation of Heat Transfer in Fluidized Beds
Accurate modeling of fluidization and heat transfer phenomena in gas-solid fluidized beds is not solely dependent on the particular selected numerical model and involved algorithms. In fact, choosing the right model for each specific operating condition, the correct implementation of each model, and the right choice of parameters and boundary conditions, determine the accuracy of the results i...
متن کاملA Dimensionless Parameter Approach based on Singular Value Decomposition and Evolutionary Algorithm for Prediction of Carbamazepine Particles Size
The particle size control of drug is one of the most important factors affecting the efficiency of the nano-drug production in confined liquid impinging jets. In the present research, for this investigation the confined liquid impinging jet was used to produce nanoparticles of Carbamazepine. The effects of several parameters such as concentration, solution and anti-solvent flow rate and solvent...
متن کاملExperimental Study of Effective Parameters in Production of Carbamazepine Nanoparticles
In this study, confined impinging liquid jets are used to produce nanoparticles of carbamazepine (CBZ). The effect of operating parameters, such as the kind of solvent,CBZ concentration, flow rate of solution and antisolvent on particle size, are experimentally investigated. The Scanning Electron Micrograph (SEM) photomicrographs show that nanodrug with smaller particle is achievable by usi...
متن کامل