A Lateral Mode Flow-through PMMA Ultrasonic Separator
نویسنده
چکیده
A flow-through ultrasonic separator constructed entirely from PMMA has been demonstrated for the first time. Continuous extraction of lipids from milk has been achieved. Construction is simple, requiring channels to be embossed at low temperatures (120°C) with a room temperature solvent bond used to close the channel.
منابع مشابه
Theoretical and Experimental Study on Vibration Propagation in PMMA Components in Ultrasonic Bonding Process
Ultrasonic bonding has an increasing application in the micro assembly of polymeric micro-electro mechanical systems (MEMS) with high requirements for fusion precision. In the ultrasonic bonding process, the propagation of ultrasonic vibration in polymer components is related to the interfacial fusion, which can be used as a monitoring parameter to control ultrasonic energy. To study the vibrat...
متن کاملFuzzy Sliding Mode Control System Design for Car- Following Behavior in Real Traffic Flow
In this paper a control system has been designed to improve traffic conditions in car following maneuver. There are different methods to design a control system. In this paper design approach is based on the Fuzzy sliding mode control (FSMC) system. The aim of designing FSMC system is to achieve safe and desire longitudinal distance and less lateral displacement. In orde...
متن کاملThe parametric study of an electrical submersible pump rotary gas separator under two-phase flow condition
The performance of the electric submersible pump (ESP) significantly affected by Gas Void Fraction (GVF). Thus, using of a Rotary Gas Separator (RGS) is a suitable solution for this issue. The performance of the RGS is function of different parameters such as geometry of impeller, rotating speed, boundary conditions, media viscosity and GVF. In this study, the influences of GVF, viscosity, and ...
متن کاملInvestigation of two-dimensional acoustic resonant modes in a particle separator.
Within an acoustic standing wave particles experience acoustic radiation forces, a phenomenon which is exploited in particle or cell manipulation devices. When developing such devices, one-dimensional acoustic characteristics corresponding to the transducer(s) are typically of most importance and determine the primary radiation forces acting on the particles. However, radiation forces have also...
متن کاملPolymethylmethacrylate/Polyacrylonitrile Membranes via Centrifugal Spinning as Separator in Li-Ion Batteries
Electrospun nanofiber membranes have been extensively studied as separators in Li-ion batteries due to their large porosity, unique pore structure, and high electrolyte uptake. However, the electrospinning process has some serious drawbacks, such as low spinning rate and high production cost. The centrifugal spinning technique can be used as a fast, cost-effective and safe technique to fabricat...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
عنوان ژورنال:
دوره شماره
صفحات -
تاریخ انتشار 2010