Cold Cavity BPM R&D for the ILC
نویسنده
چکیده
A cold L-Band cavity BPM for installation in a SCRF cryomodule is currently under development at Fermilab. The BPM has to meet the ILC BPM specifications, i.e. < 1 μm single bunch, single pass resolution, going along with sufficient accuracy and reproducibility. Real estate limitations and the superconductive RF environment require some special considerations for this design.
منابع مشابه
High Resolution Cavity BPM for ILC Final Focal System (IP-BPM)
Figure 1: IP-BPM Block ATF2 is an extension of ATF, a test facility for ILC accelerator development. ATF is the only facility today which can achieve beam emittance of the ILC specification. Experimental studies for ILC final focus is planned at ATF2, and is starting its operation at October, 2008. There are two main goals for ATF2. First, achievement of 35 nm beam size at the IP. Second, contr...
متن کاملIlc Testing Program at Cornell University
Cornell University’s superconducting cavity development program is one contributor to the global collaborative effort on critical SRF R&D for the ILC. We conduct R&D in support of the baseline cavity development as well as several alternate cavity development paths. For the baseline program we are preparing and testing ILC cavities. We have developed a new quench detection system and successful...
متن کاملIlc Rf System R&d * Ilc Rf System R&d*
The ILC Linac Group at SLAC is actively pursuing a broad range of R&D to improve the reliability and reduce the cost of the L-band (1.3 GHz) rf system. Current activities include the development of a Marx-style modulator and a 10 MW sheet-beam klystron, construction of an rf distribution system with adjustable power tap-offs and custom hybrids, tests of cavity coupler components to understand r...
متن کاملCesrTA Low-Emittance Tuning - First Results∗
The Cornell Electron Storage Ring has been reconfigured as a test accelerator (CesrTA) for damping ring R&D for the International Linear Collider (ILC). As part of the research effort, low emittance tuning techniques are being developed with a goal of achieving a vertical emittance approaching that of the ILC damping rings. These techniques include gain mapping to characterize beam position mon...
متن کاملThe Electromagnetic Background Environment for the Interaction-point Beam Feedback System at the International Linear Collider
The Interaction Point (IP) feedback system is essential for maintaining the luminosity at the International Linear Collider (ILC). It is necessary to demonstrate the performance of the feedback beam position monitor (BPM) in an electron-positron pair background similar to that expected in the ILC interaction region (IR). We have simulated the ILC beam-beam interactions and used a GEANT model of...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
عنوان ژورنال:
دوره شماره
صفحات -
تاریخ انتشار 2007