Multipath Mitigation of Permanent GPS Stations Using Wavelets

It is well known that multipath disturbance is one of the major error sources impacting on high precision GPS positioning. The multipath disturbance is largely dependent on the receiver’s environment since satellite signals can arrive at the receiver via multiple paths, due to reflections from nearby objects such as trees, buildings, vehicles, etc. Although the multipath effect can be reduced by choosing sites without multipath reflectors or by using choke-ring antennas to mitigate the reflected signal, it is difficult to eliminate all multipath effects from GPS observations. Since the geometry between the GPS satellites and a specific receiver-reflector location repeats every sidereal day, multipath tends to exhibit the same pattern between consecutive days. This repetition can then be useful for verifying the presence of multipath through the analysis of observations made at a static receiver on different days. In this study, the authors apply a wavelet decomposition technique to extract multipath from GPS observations. The extracted multipath signature is then applied directly to the GPS observations to correct for the multipath effects. The results show that the proposed method can be used to significantly mitigate the multipath effects at a permanent GPS station.