Evaluation of Static Modulus of Elasticity Depending on Concrete Compressive Strength
نویسنده
چکیده
Abstract—The paper is focused on monitoring of dependencies of different composition concretes on elastic modulus values. To obtain a summary of elastic modulus development in dependence of concrete composition design variability was the objective of the experiment. Essential part of this work was initiated as a reaction to building practice when questions of elastic moduli arose at the same time and which mostly did not obtain the required and expected values from concrete constructions.
منابع مشابه
Approach to Design of Composition of Current Concrete with Respect to Strength and Static Elasticity Modulus
The paper reflects current state of popularization of static elasticity modulus of concrete. This parameter is undoubtedly very important for designing of concrete structures, and very often neglected and rarely determined before designing concrete technology itself. The paper describes assessment and comparison of four mix designs with almost constant dosage of individual components. The only ...
متن کاملLaboratory study of mechanical properties of ordinary concrete under high heat consumption in hydraulic structures, along with validation by SEM and XRD tests
In this laboratory research, a mixing plan was made of ordinary concrete containing Portland cement type 2 with a grade of 500 kg / m3. Compressive strength, tensile strength and modulus of elasticity tests of concrete were performed on concrete samples at 90 days of processing age at 21 °C and 600 ° C. In order to further evaluate and validate the results, SEM and XRD tests were performed on c...
متن کاملRelationship between compressive strength and modulus of elasticity of High-Strength Concrete
Modulus of elasticity of concrete is frequently expressed in terms of compressive strength. While many empirical equations for predicting modulus of elasticity have been proposed by many investigators, few equations are considered to cover the entire data. The reason is considered to be that the mechanical properties of concrete are highly dependent on the properties and proportions of binders ...
متن کاملCenter for By-Products Utilization MECHANICAL PROPERTIES OF CONCRETE INFLUENCED BY INCLUSION OF FLY ASH AND TEMPERATURE
This research was carried out to evaluate performance of concrete produced, placed and cured under weather conditions normally followed in this country as well as several other countries. Mechanical properties of concrete containing low-calcium fly ash were determined under simulated hot and dry weather conditions. Compressive strength, tensile strength, and secant modulus of elasticity were me...
متن کاملEffects of Medium Temperature and Industrial By-Products on the Key Hardened Properties of High Performance Concrete
The aim of the work reported in this article was to investigate the effects of medium temperature and industrial by-products on the key hardened properties of high performance concrete. Four concrete mixes were prepared based on a water-to-binder ratio of 0.35. Two industrial by-products, silica fume and Class F fly ash, were used separately and together with normal portland cement to produce t...
متن کامل