Isothermal and cyclic oxidation of TiAl composites
نویسندگان
چکیده
Titanium Aluminide and TiAl matrix composites reinforced with alumina fibers (PRD166) were fabricated by powder metallurgy. During isothermal oxidation at 950 and 1070 OC, composites containing PRD166 fibers exhibited larger weight gains than monolithic TiAI; the composites showed evidence of oxidation along the perimeter of the fibers. A fiber reaction, which was observed after oxidation in air, is believed to result from internal oxidation. The reaction was suppressed by heat treating in vacuum and increasing the aluminum content of the matrix. The oxide adherence on TiAl was improved by the addition of alumina (PRD166) fibers.
منابع مشابه
Isothermal and cyclic oxidation behavior of AISI 430 ferritic stainless steel coated with titanium
In order to improve the oxidation resistance of ferritic stainless steel, it is possible to deposit a protective coating on steel substrate. In this research through the usage of pack cementation method a coating of titanium was applied on the surface of AISI 430 stainless steel. Scanning Electron-Microscopy (SEM), Energy- Dispersive X-ray spectrometry (EDAX) and X-ray diffraction (XRD) were us...
متن کاملPRODUCTION OF TiAl/Al2O3 AND TiAl/Ti2AlC/Al2O3 COMPOSITES BY EXPLOSION SYNTHESIS
Thermal explosion mode of combustion synthesis was used to fabricate TiAl-Al2O3 and TiAl-Ti2AlC-Al2O3 composites from elemental powder mixtures of TiO2, Al and C and characterized by XRD and Scanning Electron Microscopy (SEM) coupled with Energy-Dispersive Spectroscopy (EDS). The experimental results showed that thermite reaction of Al with TiO2 caused TiAl-Al2O3 composite formation. By adding ...
متن کاملInvestigation of the oxidation behavior of Mn-coated AISI 441 steel for SOFCs interconnect application
Protective coatings that resist oxide scale growth and decrease chromium evaporation are necessary to makestainless steel interconnect materials for long-term durable operation of solid oxide fuel cells (SOFCs). Inthis study a layer of manganese was coated on the surface of AISI 441 ferritic stainless steel which is used insolid oxide fuel cells for interconnect applications. The oxidation beha...
متن کاملبررسی رفتار اکسیداسیون همدما و سیکلی فولاد زنگنزن430 پوشش داده شده با رسوب همزمان آلومینیوم و تیتانیوم
In order to improve the oxidation and hot corrosion resistance of steels, various elements including aluminum, chromium, silicon, titanium or combination of these elements can be diffused on to the surface of steel. In this study, aluminum and titanium were simultaneously co-deposited onto the AISI 430 ferritic stainless steel substrate by the pack cementation process. Coating was examined by s...
متن کاملAn Electrochemical Sensor Based on Nickel Oxides Nanoparticle/ Graphene Composites for Electrochemical Detection of Epinephrine
The combination of graphene and nickel oxide nanoparticles yields nanostructured electrochemical sensor formed a novel kind of structurally uniform and electrocatalytic activity material. In cyclic voltammetry studies, in the presence of epinephrine, nickel oxide / graphene composite modified electrode shows a significantly higher current response for epinephrine oxidation. Based on differenti...
متن کامل