Electroactive Polymers as Environmentally Benign Coating Replacements for Cadmium Plating on High Strength Steels
نویسنده
چکیده
منابع مشابه
Zinc-Nickel Electroplate As a Replacement for Cadmium On High-Strength Steels
A need t o find a suitable replacement for cadmium electroplated coatings on mediumto highstrength steels has accelerated the development of economically viable alternatives. This edited version of a presentation at the 30th annual AerospaceIAirline Plating & Metal Finishing Forum examines the development of Australia's Defence Science and Technology Organisation's (DSTO) zinc-nickel electropla...
متن کاملHydrogen Embrittlement of High Strength Steel Electroplated with Zinc-cobalt Alloys
Slow strain rate tests were performed on quenched and tempered AISI 4340 steel to measure the extent of hydrogen embrittlement caused by electroplating with zinc-cobalt alloys. The effects of bath composition and pH were studied and compared with results for electrodeposited cadmium and zinc-10%nickel. It was found that Zinc-1%cobalt alloy coatings caused serious hydrogen embrittlement (EI 0.63...
متن کاملDevelopment and evaluation of environmentally benign techniques for polymer film coating of fine particles
Film coating of fine particles (5-20 microns) by polymers has a wide range of industrial applications, yet few techniques are commercially available that are environmentally friendly. In this study, four different techniques are considered with an ultimate goal of developing a reliable technique that is scaleable and is also environmentally friendly. Two of these techniques are fluidization bas...
متن کاملThe Search for Cadmium Plating Alternatives
Cadmium plating for Eaton Corporation began very early, with the first production baths being the "Udylite" process, then the first proprietary process that was introduced in the 1920's. Cadmium plating was widely used throughout the electrical components part of the business as It was a relatively simple process that could be plated on ferrous and non-ferrous parts. For high current and relati...
متن کاملCorrosion Control Performance Evaluation of Acceptable Alternatives for Cadmium
Cadmium has been identified as a threat to worker health and the environment. A test program was conducted to evaluate the performance of environmentally acceptable substitutes for cadmium plating. Fifteen test coatings were exposed to natural marine, industrial, and rural atmospheres for 12 -months. Additional laboratory tests were conducted to determine coating abrasion resistance, adhesion, ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
عنوان ژورنال:
دوره شماره
صفحات -
تاریخ انتشار 2014