Sintering properties of hydroxyapatite powders prepared using different methods

In the present work, the sintering behaviour of HA particles prepared via the wet precipitation method (HAp) and wet mechanochemical technique (HAwm) was investigated. The sintering behaviour of a commercial HA powder (HAc) was also studied for comparison purpose. All the three powders were characterised in terms of particle size, Ca/P ratio and crystal size. Green samples were prepared and sintered in air at temperatures ranging from 1000 1C to 1400 1C. The sintered bodies were studied in terms of the phase stability, relative density, Young’s modulus, Vickers hardness, fracture toughness and grain size. The results indicated that HAwm samples suffered phase decomposition while the HAp and HAc sintered samples showed no phase disruption throughout the temperature range employed. The HAp samples exhibited the overall best densification and properties when compared to the HAc and HAwm samples. Furthermore, the results showed that mechanical properties of sintered samples were governed by both the bulk density and the grain size. & 2012 Elsevier Ltd and Techna Group S.r.l. All rights reserved.