Photooxidation of Polypropylene/Montmorillonite Nanocomposites. 2. Interactions with Antioxidants
نویسندگان
چکیده
منابع مشابه
Tailored Nanocomposites of Polypropylene with Layered Silicates
The melt rheological properties of layered silicate nanocomposites with maleic anhydride (MA) functionalized polypropylene are contrasted to those based on ammonium-terminated polypropylene. While the MA functionalized PP based nanocomposites exhibit solid-like linear viscoelastic behavior, consistent with the formation of a long-lived percolated nanoparticle network, the single-end ammonium fu...
متن کاملPolypropylene/Modified Nanoclay Composite-Processing and Dyeability Properties
Polymer nanocomposites are new classes of composite materials derived from nanoparticles with at least one dimension in the nanometric range. Polypropylene nanocomposites have attracted a considerable interest due to its most widely used and fastest growing classes of thermoplastic polymer with low cost and low density. However, a problem associated with polypropylene is its dyeability. There h...
متن کاملEnhancement of properties of PA6/PP nanocomposites via organic modification and compatibilization
Nanocomposites based on polyamide 6/polypropylene (PA6/PP = 70/30) blend containing organophilic montmorillonite (OMMT) and maleated polypropylene (PP-g-MA) as compatibilizer were prepared by melt compounding followed by injection molding. Modification of montmorillonite (MMT) with dodecyalmine was successfully performed. The morphological and mechanical properties of nanocomposites were invest...
متن کاملInfluence of Organically-Modified Montmorillonite and Synthesized Layered Silica Nanoparticles on the Properties of Polypropylene and Polyamide-6 Nanocomposites
Nanocomposites of layered silica nanoparticles (LSN) obtained by the sol–gel method, and commercial montmorillonite clay Cloisite®20A with polypropylene (PP) and Cloisite®30B with polyamide-6 (PA6) were prepared by melt blending in order to study their effects on barrier, mechanical properties, and thermal stability. Transmission electron microscopy (TEM) showed that all of the nanocomposites p...
متن کاملPE and PP Clay Nanocomposites - Structure Modeling and Properties
The ability of commercial nanofillers Nanofil, Cloisite and by own way prepared MMT/ODA for PE and PP matrix was evaluated. Different types of mentioned type of nanofillers were added into polyethylene (PE) and polypropylene (PP) matrix in various concentrations. The amount of clays was calculated as 3 and 5 wt% to the weight of PE/PP. The PE/PP and nanofillers were mixed on a one screw KO Knea...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
عنوان ژورنال:
دوره شماره
صفحات -
تاریخ انتشار 2017