A method to calculate the acetabular cup anteversion after total hip replacement based on 3D coordinate system
نویسندگان
چکیده
Aim: To explore an accurate method to calculate acetabular cup anteversion after total hip arthroplasty. Method: 1) A 3D coordinate system was established with the center of the hip joint rotation center base as coordinate center. The acetabular exit plane and Pettersson formula acetabular anteversion and Riten Pradhan formula acetabular anteversion and acetabular true anteversion were drawn; 2) Determine the mathematical expression of Pettersson formula acetabular anteversion α and Riten Pradhan formula acetabular anteversion β in the coordinate system. The true acetabular anteversion is projection angle of Pettersson formula acetabular anteversion α on cross-section in the presence of acetabular abduction δ, determining mathematical expression of the acetabular anteversion θ by trigonometric functions. Results: Real acetabular cup anteversion θ = arctg (tgβ/cosδ). Conclusion: The true acetabular cup anteversion and Pettersson formula anteversion and Riten Pradhan for mula anteversion were quite different. The difference was increased with the acetabular cup abduction angle increased. The formula was simple and accurate and worthy of clinical reference.
منابع مشابه
Measuring Acetabular Cup Orientation on Antero-Posterior Radiographs of the Hip after Total Hip Arthroplasty with a Vector Arithmetic Radiological Method. Is It Valid and Verified for Daily Clinical Practice?
PURPOSE The aim of this prospective study is to validate a vector arithmetic method for measuring acetabular cup orientation after total hip arthroplasty (THA) and to verify the clinical practice. MATERIALS AND METHODS We measured cup anteversion and inclination of 123 patients after cementless primary THA twice by two examiners on AP pelvic radiographs with a vector arithmetic method and com...
متن کاملCorrecting for Pelvic Posture Influence on Cup Anteversion Measurements
INTRODUCTION Malposition of the acetabular component is a risk factor for postoperative dislocation after total hip arthroplasty (THA)[1]. Current radiographic techniques for assessing cup anteversion have been developed, but they have limitations[2]. The purpose of this study is to investigate the effect of and reduce the error caused by various pelvis postures on cup anteversion measurement. ...
متن کامل[Our experience with an image guided navigation system for accurate alignment in total hip replacement by minimally invasive posterolateral surgery].
PURPOSE OF THE STUDY The aim of the study was to compare a radiographic position of the acetabular component with a position guided by the navigation system in final acetabular cup alignment. MATERIAL Between May and October 2005, 15 patients underwent implantation of a cementless acetabular component from the posterolateral minimally invasive approach with the use of kinematic navigation. ...
متن کاملFemur first surgical technique: a smart non-computer-based procedure to achieve the combined anteversion in primary total hip arthroplasty
BACKGROUND The relevance of prosthetic component orientation to prevent dislocation and impingement following total hip arthroplasty (THA) has been widely accepted. We investigated the use of a non-computer-based surgery to address the reciprocal orientation of the acetabular and femoral components. METHODS In the femur first technique, the cup is positioned relative to the stem. When the def...
متن کاملIs the transverse acetabular ligament a reliable cup orientation guide?
BACKGROUND AND PURPOSE It is controversial whether the transverse acetabular ligament (TAL) is a reliable guide for determining the cup orientation during total hip arthroplasty (THA). We investigated the variations in TAL anatomy and the TAL-guided cup orientation. METHODS 80 hips with osteoarthritis secondary to hip dysplasia (OA) and 80 hips with osteonecrosis of the femoral head (ON) were...
متن کامل