Numerical Examples for Various Systems and Structures Klystron SLAC Cross - Bar Cross - Bar Structure Disk - Loaded Structure Structure with Energy Compression
نویسندگان
چکیده
This paper presents some of the new design requirements for linear col-liders and describes the types of RF systems and accelerating structures that might produce very high energies and gradients within reasonable power consumption limits. Directions for future research are indicated.
منابع مشابه
Three Different Methods for Approximate Analysis of Bar Structures
In this paper, modified solutions were compared through utilizing three different approximate methods for bar structures. The modifications considered various changes in the initial design. To authors' best of knowledge, the studies have carried out on this matter so far are not broad enough and have considerred the simeltaneous variations of size, geometry and topology on the bar structures. I...
متن کاملExperimental Study of Masonry Structure Under Impact Loading and Comparing it with Numerical Modeling Results via Finite Element Model Updating
Given the sophisticated nature of the blast phenomenon in relation to structures, it is of significance to accurately investigate the structure behavior under blast loads. Due to its rapid and transient nature, blast loading is one of the most important dynamic loadings on the structures. Since masonry materials are widely used as the partition and bearing walls in the existing and newly-built ...
متن کاملOptimum Location of Outrigger-belt Truss in Tall Buildings Based on Maximization of the Belt Truss Strain Energy
In this paper, based on maximizing the outrigger-belt truss system’s strain energy, a methodology for determining the optimum location of an outrigger-belt truss system is presented. Tall building structures with combined systems of framed tube, shear core and outrigger-belt truss system’s are modeled using continuum approach. In this approach, the framed tube system is modeled as a cantilevere...
متن کاملDETERMINATION OF OPTIMUM LOCATION FOR FLEXIBLE OUTRIGGER SYSTEMS IN NON-UNIFROM TALL BUILDINGS USING ENERGY METHOD
In this paper, based on maximizing the outrigger-belt truss system’s strain energy, a methodology for determining the optimum location of a flexible outrigger system is presented. Tall building structures with combined systems of framed tube, shear core, belt truss and outrigger system are modeled using continuum approach. In this approach, the framed tube sys...
متن کاملCommissioning of the First Klystron-based X-band Power Source at Cern
A new klystron based X-band rf power source operating at 11.994 GHz has been installed and started to be commissioned at CERN in collaboration with CEA Saclay and SLAC for CLIC accelerating structure tests. The system comprises a solid state high voltage modulator, an XL5 klystron developed by SLAC, a cavity based SLED type pulse compressor, the necessary low level rf system including rf diagno...
متن کامل