Characterization of 3D Printed Fracture Networks
نویسندگان
چکیده
Tracer testing has been used to obtain hydraulic properties in a reservoir system and may help characterize the fracture networks inside the reservoir. Numerous studies at various scales have shown that the distribution of many fracture properties (i.e., length, displacement) follows a power law scaling with some cutoffs. Fractal dimension is useful to evaluate the geometric characteristics of fracture networks. We studied mass transport in a fracture network where fracture lengths are given by a power law with maximum and minimum length. Effects of fractal dimension of fracture lengths on mass transport were investigated by particle tracking simulations and laboratory flow experiments in a fractured flow model. The numerical simulation results indicate that the fractal nature of the fracture length results in non-Fickian behavior on tracer responses. In the laboratory flow experiments, a 3D printer was used to create artificial fracture network models with different fractal dimensions. The experimental tracer responses of the 3D printed fracture model show similar features to the results by numerical simulation. A challenge of the printing process was the limited resolution of the 3D printer and the solubility of the supporting wax.
منابع مشابه
Developing a 3D stochastic discrete fracture network model for hydraulic analyses
Fluid flow in jointed rock mass with impermeable matrix is often controlled by joint properties, including aperture, orientation, spacing, persistence and etc. On the other hand, since the rock mass is made of heterogeneous and anisotropic natural materials, geometric properties of joints may have dispersed values. One of the most powerful methods for simulation of stochastic nature of geometri...
متن کاملUse of a real-size 3D-printed model as a preoperative and intraoperative tool for minimally invasive plating of comminuted midshaft clavicle fractures
BACKGROUND Open reduction and plate fixation is the standard operative treatment for displaced midshaft clavicle fracture. However, sometimes it is difficult to achieve anatomic reduction by open reduction technique in cases with comminution. METHODS We describe a novel technique using a real-size three dimensionally (3D)-printed clavicle model as a preoperative and intraoperative tool for mi...
متن کاملApplication of 3D Printing in the Surgical Planning of Trimalleolar Fracture and Doctor-Patient Communication
To evaluate the effect of 3D printing in treating trimalleolar fractures and its roles in physician-patient communication, thirty patients with trimalleolar fractures were randomly divided into the 3D printing assisted-design operation group (Group A) and the no-3D printing assisted-design group (Group B). In Group A, 3D printing was used by the surgeons to produce a prototype of the actual fra...
متن کاملWelding of 3D-printed carbon nanotube–polymer composites by locally induced microwave heating
Additive manufacturing through material extrusion, often termed three-dimensional (3D) printing, is a burgeoning method for manufacturing thermoplastic components. However, a key obstacle facing 3D-printed plastic parts in engineering applications is the weak weld between successive filament traces, which often leads to delamination and mechanical failure. This is the chief obstacle to the use ...
متن کاملMeasuring the Interlayer Fracture Resistance of Fdm Printed Thermoplastics
With increasing structural and functional applications of 3D printed materials, their mechanical performance is highly demanded. So far, stressand strain-based experiments have been used to characterize the mechanical properties of fused deposition modeled (FDM) samples. In this work, a fracture-mechanics-based methodology was developed to characterize the interlayer adhesion of FDM 3D printed ...
متن کامل