RADIO FREQUENCY NOISE MEASUREMENTS AND MODELS FOR INDOOll
نویسندگان
چکیده
This paper describes . average and impulsive noise measurements inside several office buildings and retail stores. The receiver had a 70-dB dynamic range and operated at 918 MHz, 2.44 GHz, and 4.0 GHz with a nominal 40 MHz 3-dB RF bandwidth. Omni-directional and directional antennas were used to investigate the characteristics and sources of RF noise in indoor channels. Statistical analyseSof -the measurements are presented in the form of noise level distributions, amplitude probability distributions, pulse duration distributions, and interarrival time distributions.. These analyses indicate that photocopiers, printers (line printers and cash register receipt printers), elevators, and microwave ovens are significant sources of impulsive noise in office and retail environments.
منابع مشابه
Measurement and Computational Modeling of Radio-Frequency Electromagnetic Power Density Around GSM Base Transceiver Station Antennas
Evaluating the power densities emitted by GSM1800 and GSM900 BTS antennas isconducted via two methods. Measurements are carried out in half a square meter grids around twoantennas. CST Microwave STUDIO software is employed to estimate the power densities in order fordetailed antenna and tower modeling and simulation of power density. Finally, measurements obtainedfrom computational and experime...
متن کاملRadio Spectrum Pollution : Facing the Challenge of a Threatened Resource
Reading List Version 1.0 This Conference brings together academics, policymakers, spectrum users, and advocates to examine the extent of, and trends in, radio noise pollution and to suggest how the associated policies and regulations might need to be adjusted to reflect changes in radio noise levels. This Reading List offers participants background reading and references, organized in reverse c...
متن کاملHigh-Frequency Small Signal AC and Noise Modeling of MOSFETs for RF IC Design
In this paper, high-frequency (HF) AC and noise modeling of MOSFETs for radio frequency (RF) integrated circuit (IC) design is discussed. A subcircuit RF model incorporating the HF effects of parasitics is presented. This model is compared with the measured data for both parameter and characteristics. Good model accuracy is achieved against measurements for a 0.25 m RF CMOS technology. The HF n...
متن کاملIndustrial Equipment Radio Frequency Noise Measurements and Models for Indoor Wireless Communications at 918 MHz , 2 . 44 GHz , and , 4 . 0 GHz
Development of radio-frequency communications equipment for wireless indoor networks is an active field. A thorough understanding of the channel characteristics is needed to develop reliable system design guidelines and installation techniques for future indoor wirel~ss systems. These systems will be used for reconfigurable voice, data, and video networks that link portable computers, vision sy...
متن کاملMeasurements and Models of Radio Frequency Impulsive Noise for Indoor Wireless Communications
AbsfracfThis paper presents the results of average and impulsive noise measurements inside several office buildings and retail stores. The noise measurement system operated at 918 MHz, 2.44 GHz, and 4 GHz with a nominal 40 MHz 3 dB RF bandwidth. Omnidirectional and directional antennas were used to investigate the characteristics and sources of RF noise in indoor channels. Statistical analyses ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
عنوان ژورنال:
دوره شماره
صفحات -
تاریخ انتشار 2011