Critical assessment of models for predicting the Ms temperature of steels
نویسندگان
چکیده
Different approaches to predicting the Ms temperatures of steels are reviewed and discussed with the objective of summarising the main characteristics, advantages and difficulties of each method, mostly from a practical point of view. Empirical methods, and methods based on thermodynamics are then assessed against published data.
منابع مشابه
PREDICTION OF CRITICAL STRESS AND STRAIN FOR THE ONSET OF DYNAMIC RECRYSTALLIZATION IN PLAIN CARBON STEELS
The aim of the present study is the prediction of critical conditions (including critical strain and flow stress) for the initiation of dynamic recrystallization during thermo-mechanical processing of plain carbon steels. For this propose, torsion tests were conducted at different temperature (1050, 1100 and 1150˚C) and strain rates (0.002, 0.02 and 0.2/s). All flow curves showed a peak st...
متن کاملA model for predicting the Ms temperatures of steels
Using neural networks in a bayesian framework, a model has been derived for the Ms temperature of steels over a wide range of compositions. By its design and by use of a more extensive database, this model improves over existing ones, by its accuracy and its ability to avoid wild predictions.
متن کاملPrediction of Mechanical Properties of TWIP Steels using Artificial Neural Network Modeling
In recent years, great attention has been paid to the development of high manganese austenitic TWIP steels exhibiting high tensile strength and exceptional total elongation. Due to low stacking fault energy (SFE), cross slip becomes more difficult in these steels and mechanical twinning is then the favored deformation mode besides dislocation gliding. Chemical composition along with processing ...
متن کاملAssessment of Downscaling Methods in Predicting Climatic Parameters under Climate Change Status: A case study in Ardabil Synoptic Station
Climate change is an unprecedented change are taking place. Changes of meteorological parameters such as precipitation, maximum and minimum temperatures. Since weather forecasting is important for these parameters, in this study, the performance of Statistical Downscaling Model (SDSM and Lars-WG) were used to predict temperature and precipitation and mean of these changes for the periods 2046-2...
متن کاملEffect of Composition on the Recrystallization Behavior of if Steels During Simulated Hot Strip Rolling
Flow curves are generated in muti-pass torsion tests for a titanium stabilized and a niobium stabilized IF steel. Two types of test schedule are used, one based on plate rolling and the other approximating strip rolling. The purpose of the former is to define the three critical temperatures of steel rolling. The strip schedules are varied in order to investigate the influence of increasing the ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
عنوان ژورنال:
دوره شماره
صفحات -
تاریخ انتشار 2005