A 3D-printed microcapillary assembly for facile double emulsion generation.
نویسندگان
چکیده
The design, fabrication and testing of facile microcapillary device assembly, suitable for monodisperse double emulsion production is reported. The interface is fabricated in a direct and rapid manner via 3D printing and shown to be robust in the controllable generation of both single and double emulsions at high generation frequencies.
منابع مشابه
Plug-n-play microfluidic systems from flexible assembly of glass-based flow-control modules.
In this study, we report on a simple and versatile plug-n-play microfluidic system that is fabricated from flexible assembly of glass-based flow-control modules for flexibly manipulating flows for versatile emulsion generation. The microfluidic system consists of three basic functional units: a flow-control module, a positioning groove, and a connection fastener. The flow-control module that is...
متن کاملMonodisperse double emulsions generated from a microcapillary device.
Double emulsions are highly structured fluids consisting of emulsion drops that contain smaller droplets inside. Although double emulsions are potentially of commercial value, traditional fabrication by means of two emulsification steps leads to very ill-controlled structuring. Using a microcapillary device, we fabricated double emulsions that contained a single internal droplet in a core-shell...
متن کاملSafety and Efficacy of Casting During COVID-19 Pandemic: A Comparison of the Mechanical Properties of Polymers Used for 3D Printing to Conventional Materials Used for the Generation of Orthopaedic Orthoses
To reduce the risk of spread of the novel coronavirus (COVID-19), the emerging protocols are advising for less physicianpatientcontact, shortening the contact time, and keeping a safe distance. It is recommended that unnecessary castingbe avoided in the events that alternative methods can be applied such as in stable ankle fractures, and hindfoot/midfoot/forefoot injuries. Fib...
متن کامل3D Bioprinting of complex channels-Effects of material, orientation, geometry, and cell embedding.
Creating filled or hollow channels within 3D tissues has become increasingly important in tissue engineering. Channels can serve as vasculature enhancing medium perfusion or as conduits for nerve regeneration. The 3D biofabrication seems to be a promising method to generate these structures within 3D constructs layer-by-layer. In this study, geometry and interface of bioprinted channels were in...
متن کاملResistance Properties of Printed Polyolefin Films using Water-Based Inks
During recent decades due to the increase in pollutants release from various industries, reduction or elimination of volatile organic compounds VOCs has become one of the main purposes of researches in order to protect the environment. In this research, two acrylic emulsion resins and an adhesion promoter polyester emulsion resin were used to optimize water-based printing ink formulation for pr...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
عنوان ژورنال:
- Lab on a chip
دوره 14 21 شماره
صفحات -
تاریخ انتشار 2014