Comparative Analysis of Two Twist-Based SPD Processes: Elliptical Cross-Section Spiral Equal-Channel Extrusion vs. Twist Extrusion
نویسندگان
چکیده
The present paper deals with numerical comparison of two twist-based severe plastic deformation processes: (i) the elliptical cross-section spiral equal-channel extrusion (ECSEE) proposed recently as a novel process and (ii) the classical twist extrusion (TE). ECSEE was developed in attempt to process cylindrical work pieces and to generate more uniform strain distribution compared to classical TE. However, the present finite element simulations showed that twist zones used in both methods impose identical stress and strain states. Furthermore, the ability of ECSEE to treat cylindrical billets is achieved at the expense of the possibility to perform multi-pass extrusion through the twist zone and it requires higher loads for the overall process of extrusion. [doi:10.2320/matertrans.MH201315]
منابع مشابه
An Upper Bound Solution for Analysis of Twist Extrusion Process with Elliptical Die Cross-section
Twist extrusion process is a rather new route to produce highly strained materials. In this process, severe plastic deformation is applied by large shear strains. In current article, required energy for twist extrusion by use of admissible velocity field together with the upper bound technique is predicted. The proposed model is capable of considering the effect of various parameters such as di...
متن کاملSimulation of a New Process Design to Fabricate a Rectangular Twist Waveguide Using Extrusion and a Twist Die
The aim of the present study is to determine the feasibility of making a rectangular twist waveguide used to rotate electromagnetic waves. For this purpose, the process of fabricating an aluminum rectangular twist waveguide was simulated by making use of finite element method and Deform software. The optimum length and angle of the twist die for manufacturing a twist waveguide with inner cross ...
متن کاملPrediction of Extrusion Pressure in Vortex Extrusion Using a Streamline Approach
Vortex extrusion (VE) is a severe plastic deformation technique which is based on the synergies between high strain accumulation and high hydrostatic pressure. Such a high amount of pressure, places a mandate to seek the method for investigation of the load under processing conditions. For this, kinematically admissible velocity field and upper bound terms based on Bezier formulation are develo...
متن کاملEvolution of Texture and Grain Size during Equal Channel Angular Extrusion of Pure Copper and 6012 Aluminum
Among different SPD techniques, Equal channel Angular Pressing has attracted the most attentions, because of applying large strain to solid bulk materials. In this research, ECAP process up to 6 passes was carried out on a pure copper and a 6012 Al-Mg-Si alloy with BC route in ECAP dies with Φ=120 and Ψ=20 and diameter of 20and 10 millimeter respectively. Moreover, X-ray diffraction (XRD) syste...
متن کاملEvolution of Texture and Grain Size during Equal Channel Angular Extrusion of Pure Copper and 6012 Aluminum
Among different SPD techniques, Equal channel Angular Pressing has attracted the most attentions, because of applying large strain to solid bulk materials. In this research, ECAP process up to 6 passes was carried out on a pure copper and a 6012 Al-Mg-Si alloy with BC route in ECAP dies with Φ=120 and Ψ=20 and diameter of 20and 10 millimeter respectively. Moreover, X-ray diffraction (XRD) syste...
متن کامل