Numerical study of turbulent flow-induced sound production in presence of a tooth-shaped obstacle: towards sibilant [s] physical modeling
نویسندگان
چکیده
The sound generated during the production of the sibilant [s] results from the impact of a turbulent jet on the incisors. Physical modeling of this phenomenon depends on the characterization of the properties of the turbulent flow within the vocal tract and of the acoustic sources resulting from the presence of an obstacle in the path of the flow. The properties of the flow-induced noise strongly depend on several geometric parameters of which the influence has to be determined. In this paper, a simplified vocal tract/tooth geometric model is used to carry out a numerical study on the flow-induced noise generated by a tooth-shaped obstacle placed in a channel. The performed simulations bring out a link between the level of the generated noise and the aperture of the constriction formed by the obstacle.
منابع مشابه
3D Numerical Simulation of the Separated Turbulent Shallow Flow around a Single Side Obstacle
In this paper, the performance of Reynolds Averaged Navier Stokes (RANS) simulations was evaluated to predict the flow structure developed by the presence of a sidewall obstruction in a uniform open-channel shallow flow. The study of these flow structures is important because they present in several real world configurations, such as groynes in rivers, where the erosion processes, mass transpor...
متن کاملNumerical simulation of nanofluid flow over diamond-shaped elements in tandem in laminar and turbulent flow
In this paper, the Al2O3-water nanofluid flow in laminar and turbulent flows inside tubes fitted with diamond-shaped turbulators is numerically modeled. The nanofluid flow is modeled by employing a two-phase mixture method and applying the constant heat flux boundary condition at tube walls. In the results, the effects of different parameters such as the geometry of turbulators, volume fraction...
متن کاملUse of Stochastic Turbulence Models in Jet Acoustics
There are many approaches to determine the sound propagated from turbulent flows. In hybrid methods, the turbulent noise source field is computed or modeled separately from the far-field calculations. To have an initial and quick estimation of the sound propagation, less computationally intensive methods can be developed using stochastic models of the turbulent fluctuations. In this paper, ...
متن کاملNumerical Simulation of Separation Bubble on Elliptic Cylinders Using Three-equation k-? Turbulence Model
Occurrence of laminar separation bubbles on solid walls of an elliptic cylinder has been simulated using a recently developed transitional model for boundary layer flows. Computational method is based on the solution of the Reynolds averaged Navier-Stokes (RANS) equations and the eddy-viscosity concept. Transitional model tries to simulate streamwise fluctuations, induced by freestream turbulen...
متن کاملDirect Numerical Simulation of the Wake Flow Behind a Cylinder Using Random Vortex Method in Medium to High Reynolds Numbers
Direct numerical simulation of turbulent flow behind a cylinder, wake flow, using the random vortex method for an incompressible fluid in two dimensions is presented. In the random vortex method, the primary variable is vorticity of the flow field. After generation on the cylinder wall, it is followed in two fractional time step in a Lagrangian system of coordinates, namely convection and diffu...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
عنوان ژورنال:
دوره شماره
صفحات -
تاریخ انتشار 2010