Preoperative auricular wax pattern duplication for surgical template fabrication.
نویسنده
چکیده
Craniofacial implants have been shown to provide excellent stability and retention for auricular prosthodontic rehabilitation. The locations of implant placement are critical to achieve optimal prosthetic results. This article describes a procedure for fabricating a surgical template from a diagnostic wax-up of an ear without destroying the wax pattern. A full-contour template can assist in proper positioning of craniofacial implants, which in turn can complement the prosthetic result.
منابع مشابه
Fabrication and use of a surgical template for placing implants to retain an auricular prosthesis.
A procedure is described for the fabrication of a 3-dimensional surgical template to guide the placement of implants to retain an auricular prosthesis. This procedure requires a diagnostic wax pattern that is checked while on the patient to ensure it is positioned correctly and is also the correct size. The wax pattern is processed into a clear, methyl methacrylate resin, 3-dimensional surgical...
متن کاملFabrication procedure for cranial prostheses.
A procedure for duplication of cranial bone flaps used in cranioplasty is described. This procedure overcomes the difficulties inherent in direct duplication of irregular-shaped bone flaps through primary replication of the flap in wax. The wax pattern is used to fabricate the definitive prosthesis.
متن کاملساخت استنت رادیوگرافی و جراحی برای ایمپلنت های ماگزیلوفیشیال
A procedure was explained to fabricate a surgical stent to aid the placement of maxillofacial implants for prosthetic auricular rehabilitation. An impression of the defect was made, and a wax pattern of the missing ear completed and evaluated on the patient. The definitive wax prosthesis was processed in clear acrylic resin. Also an occlusal maxillary splint was fabricated and joined to the acr...
متن کاملA different wax sculpture technique for implant-retained auricular prosthesis
Replacement of missing ears is a challenging task in which extensive array of materials and techniques have been employed. This article describes a different and simplified procedure for fabricating auricular prostheses very similar to the intact left ear of the patient. A 65-year-old male patient was referred to the Department of Prosthodontics with the loss of the right ear. In this case, the...
متن کاملElectrochemical fabrication of Cu/Pd multilayer nanowires in polycarbonate template
In this work,copper/palladium (Cu/Pd) multilayer nanowires were successfully prepared by electrodeposition method using polycarbonate template. The fabrication of Pd/Cu multilayer nanowires was controlled by analyzing the current–time transient during electrodeposition using potentiostat. The morphological properties of the nanowires were studied by scanning electron microscopy (SEM) and resu...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
عنوان ژورنال:
- The Journal of prosthetic dentistry
دوره 81 5 شماره
صفحات -
تاریخ انتشار 1999