Wafer-to-Wafer Bonding for Microstructure Formation
نویسنده
چکیده
Wafer-to-wafer bonding processes for microstructure fabrication are categorized and described. These processes have an impact in packaging and structure design. Processes are categorized into direct bonds, anodic bonds, and bonds with intermediate layers. Representative devices using wafer-to-wafer bonding are presented. Processes and methods for characterization of a range of bonding methods are discussed. Opportunities for continued development are outlined.
منابع مشابه
Microstructure Examination of Copper Wafer Bonding
The microstructure morphologies and oxide distribution of copper bonded wafers were examined by means of transmission electron microscopy (TEM) and energy dispersion spectrometer (EDS). Cu wafers exhibit good bond properties when wafer contact occurs at 400°C/4000 mbar for 30 min, followed by an anneal at 400°C for 30 min in N2 ambient atmosphere. The distribution of different defects showed th...
متن کاملMicrostructure evolution and abnormal grain growth during copper wafer bonding
Evolution of microstructure morphologies and grain orientations of Cu-Cu bonded wafers during bonding and annealing were studied by means of transmission electron microscopy, electron diffraction and X-ray diffraction. The bonded Cu grain structure reaches steady state after post-bonding anneal. An abnormal (220) grain growth was observed during the initial bonding process. Upon annealing, the ...
متن کاملTemperature and Duration Effects on Microstructure Evolution During Copper Wafer Bonding
Interfacial morphologies during Cu wafer bonding at bonding temperatures of 300°C to 400°C for 30 min followed by an optional 30 or 60 min nitrogen anneal were investigated by means of transmission electron microscopy. Results showed that increased bonding temperature or increased annealing duration improved the bonding quality. Wafers bonded at 400°C for 30 min followed by nitrogen annealing a...
متن کاملWafer-level Cu-Cu bonding technology
0026-2714/$ see front matter 2011 Elsevier Ltd. A doi:10.1016/j.microrel.2011.04.016 ⇑ Corresponding author. E-mail address: [email protected] (K.-N. C Semiconductor industry currently utilizes copper wafer bonding as one of key technologies for 3D integration. This review paper describes both science and technology of copper wafer bonding with regard to present applications. The classifi...
متن کاملProgress in Copper-based Wafer Bonding
This article discusses a method of wafer-to-wafer bonding using metallic copper as the bonding medium. This method is commonly known as thermo-compression bonding. Bonding process is described and characterization results are presented. Reliability issues related to voids formation in the bonded layer is discussed. A survey on progress of copper-based wafer bonding and its application for 3-D I...
متن کامل