Fatigue analysis of glass fiber reinforced composites
نویسنده
چکیده
Some structure materials can match the flexibility and effectiveness of glass fiber Reinforced plastic, commonly called GFRP for short or simply fiberglass. Even it is very high strength, light weight, strong, and completely waterproof, it can be molded into free form shapes such as aerospace structures, and then also it has its endurance limits. Endurance limit means loss of strength and stiffness. This article describes about the fatigue life material properties of GFRP composites are studied based on an extensive experimental study. Then the loss of stiffness was used as a damage parameter and related to raise the temperature. The objective of this project is to analyze the damage and ageing effects in composites and find the change in physical and mechanical properties. The work discusses the experimental investigations carried out on Glass Fiber reinforced plastic (GFRP) composite specimens in which the acquire result is analyzed. Mainly this article explains about the fatigue analysis of glass fiber reinforced composites with varying loads and shown the number of cycles with stand.
منابع مشابه
Creep Behavior of Basalt and Glass Fiber Reinforced Epoxy Composites
The creep behavior of basalt fiber reinforced epoxy (BFRE) and glass fiber reinforced epoxy (GFRE) composites was studied through tensile testing at high temperature. To study the effect of reinforcing epoxy, the micro glass powder (MGP) was added at various volume percentage into the epoxy resin in BFRE composites. The initial strain for all the specimens were evaluated and compared with each ...
متن کاملAnalysis of Milling Process Parameters and their Influence on Glass Fiber Reinforced Polymer Composites (RESEARCH NOTE)
Milling of fiber reinforced polymer composites is of great importance for integrated composites with other mating parts. Improper selection of cutting process parameters, excessive cutting forces and other machining conditions would result in rejection of components. Therefore, machining conditions are optimized to reduce the machining forces and damages. This work reports practical experiments...
متن کاملThermoreversible and remendable glass–polymer interface for fiber-reinforced composites
Adhesion of the reinforcement to the polymer matrix is essential for load transfer from the polymer matrix to the reinforcement material in fiber-reinforced composites. The reversible Diels–Alder reaction between a furan-functionalized epoxy-amine thermosetting matrix with a maleimide-functionalized glass fiber was used to impart remendability at the polymer–glass interface for potential applic...
متن کاملEvaluation of Mechanical and Tribological Properties of Glass/Carbon Fiber Reinforced Polymer Hybrid Composite
Polymer matrix composites used in different industrial applications due to their enhanced mechanical properties and lightweight. However, these materials are subjected to friction and wear situations in some industrial and automobile applications. Therefore, there is a need to investigate the wear properties of polymer matrix composite materials. This article emphasizes the dry abrasive wear be...
متن کاملR&D on glass fiber reinforced epoxy resin composites for superconducting Tokamak
The glass fiber reinforced epoxy resin composites play an important role in superconducting Tokamak, which are used to insulate the metal components, such as superconducting winding, cooling pipes, metal electrodes and so on. For the components made of metal and glass fiber reinforced epoxy resin composites, thermal shrinkage leads to non-ignorable thermal stress, therefore, much attention shou...
متن کامل