Zahra Khonsari 2.4 Ghz Inkjet-printed Rf Power Harvester on Bulk Cardboard Substrates
نویسندگان
چکیده
TAMPERE UNIVERSITY OF TECHNOLOGY Master’s Degree Programme in Faculty of Computing and Electrical engineering KHONSARI, ZAHRA: 2.4 GHz Inkjet-printed RF Power Harvester on Bulk Cardboard Substrate Master of Science Thesis, 50 pages. August 2014 Major: Radio Frequency Electronics Examiner: Professor Leena Ukkonen and Professor Lauri Sydänheimo
منابع مشابه
Inkjet printed flexible antenna on textile for wearable applications
We report a direct write inkjet printing technique for fabricating a flexible antenna on textile for use in smart textile applications such as wearable systems (Rienzo et al. 2006). The complete antenna was deposited entirely using inkjet printing. The inkjet printed antenna is based on a half wavelength dipole antenna offering a planar structure and acceptable size. The printable silver nanopa...
متن کاملInkjet-Printed UHF RFID Tags on Renewable Materials
Radio frequency identification (RFID) provides great potential for different Internet of Things (IOT) applications. In the future, material choices in these IOT devices will have a huge effect on the environment and thus use of renewable materials is a growing trend. In this paper, passive ultra high frequency (UHF) RFID tags were inkjet-printed directly on wood, paper, and cardboard substrates...
متن کاملInkjet 3D Printed Miniature Water Turbine Energy Harvester-Flow Meter for Distributed Measurement Systems
An energy harvester fabricated by inkjet 3D printing based on miniature water flow turbine with mechanical and electrical components necessary for electrical energy generation is shown. Turbine (outside diameter 25.4 mm (1”) and 14 mm length) is able to generate electric power of 4 mW for 14 L/min of water flow and it gives 0.7 V for optimal load resistance (RL = 55 Ω). The harvester itself may...
متن کاملA comparative study of two conductive inkjet inks for fabrication of RF circuit structures
Two commercially available silver inks were inkjet printed to fabricate the seed tracks (seed layers) of radio frequency (RF) circuit structures on a high frequency substrate material. One of them is a nanoparticle based ink, and the other, a non-particle based organic silver complex ink. Subsequent to printing, these seed layers were copper plated using an electroless copper plating process, t...
متن کاملReconfigurable RF Energy Harvester with Customized Differential PCB Antenna
In this work, a Radio Frequency (RF) Energy Harvester comprised of a differential Radio Frequency-to-Direct Current (RF-DC) converter realized in ST130 nm Complementary Metal-Oxide-Semiconductor (CMOS) technology and a customized broadband Printed Circuit Board (PCB) antenna with inductive coupling feeding is presented. Experimental results show that the system can work with different carrier f...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
عنوان ژورنال:
دوره شماره
صفحات -
تاریخ انتشار 2014