A designed bithiopheneimide-based conjugated polymer for organic photovoltaic with ultrafast charge transfer at donor/PC(71)BM interface: theoretical study and characterization.

نویسندگان

  • Shuang-Bao Li
  • Yu-Ai Duan
  • Yun Geng
  • Hai-Bin Li
  • Jian-Zhao Zhang
  • Hong-Liang Xu
  • Min Zhang
  • Zhong-Min Su
چکیده

In the current work, a series of bithiopheneimide (BTI)-based D-A copolymers were investigated based on the reported PDTSBTI (1) to screen excellent molecules toward organic photovoltaic (OPV) donor materials. It is found that the PCE based on the proposed derivative 4, where the silicon atom is replaced with vinyl and cyano groups on the DTS unit, shows a 70 percent improvement by Scharber diagrams compared with its prototype 1. Then, the charge transfer dynamics of 1/PC71BM and 4/PC71BM were investigated, including the intermolecular charge transfer (inter-CT) and recombination (inter-CR) rates. The theoretical data demonstrate that the ratio kinter-CT/kinter-CR of 4/PC71BM heterojunction is about 1 × 10(5) times higher than that of 1/PC71BM. These results clearly reveal that the designed donor molecule 4 will be a promising candidate for high-performance OPV device. We expect that this work from electron processing at the D/A interface may provide a theoretical guideline for further optimization and design of organic copolymer donor materials.

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Effects of additives on the morphology of solution phase aggregates formed by active layer components of high-efficiency organic solar cells.

Processing additives are used in organic photovoltaic systems to optimize the active layer film morphology. However, the actual mechanism is not well understood. Using X-ray scattering techniques, we analyze the effects of an additive diiodooctane (DIO) on the aggregation of a high-efficiency donor polymer PTB7 and an acceptor molecule PC(71)BM under solar cell processing conditions. We conclud...

متن کامل

Alternating and diblock donor-acceptor conjugated polymers based on diindeno[1,2-b:2',1'-d]thiophene structure: synthesis, characterization, and photovoltaic applications.

Pentacyclic diindeno[1,2-b:2',1'-d]thiophene (DIDT) unit is a rigid and coplanar conjugated molecule. To the best of our knowledge, this attractive molecule has never been incorporated into a polymer and thus its application in polymer solar cells has never been explored. For the first time, we report the detailed synthesis of the tetra-alkylated DIDT molecule leading to its dibromo- and diboro...

متن کامل

Charge separation and carrier dynamics in donor-acceptor heterojunction photovoltaic systems

Electron transfer and subsequent charge separation across donor-acceptor heterojunctions remain the most important areas of study in the field of third-generation photovoltaics. In this context, it is particularly important to unravel the dynamics of individual ultrafast processes (such as photoinduced electron transfer, carrier trapping and association, and energy transfer and relaxation), whi...

متن کامل

Role of coherence and delocalization in photo-induced electron transfer at organic interfaces

Photo-induced charge transfer at molecular heterojunctions has gained particular interest due to the development of organic solar cells (OSC) based on blends of electron donating and accepting materials. While charge transfer between donor and acceptor molecules can be described by Marcus theory, additional carrier delocalization and coherent propagation might play the dominant role. Here, we d...

متن کامل

Synthesis, characterization and photovoltaic applications of a low band gap polymer based on s-tetrazine and dithienosilole.

A new copolymer of dithienosilole (DTS) and dithienyl-s-tetrazine (TTz), PDTSTTz, has been designed and synthesized. This solution processable polymer shows a low band gap, strong absorption and good thermal stability. Solar cells from the blend of this polymer with PC(71)BM showed power conversion efficiency (PCE) up to 4.2%.

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

عنوان ژورنال:
  • Physical chemistry chemical physics : PCCP

دوره 16 47  شماره 

صفحات  -

تاریخ انتشار 2014