Design of SET tolerant LC oscillators using distributed bias circuitry
نویسندگان
چکیده
منابع مشابه
Noise Reduction in Transistor Oscillators: Part 1—Resonant Circuits
This series of articles discusses oscillator phase noise reduction techniques and gives specific resonant circuit solutions using lumped and distributed parameters for both frequency stabilization and phase noise reduction. These topics are covered in Part 1. Phase noise improvement can also be achieved by appropriate low-frequency loading and feedback circuitry optimization. The feedback syste...
متن کاملAnalysis of Oscillation Amplitude and Phase Error in Multiphase LC Oscillators
Abstract This work proposes a novel method to find the phase error and oscillation amplitude in multiphase LC oscillators. A mathematical approach is used to find the relationship between every stage's output phase and its coupling factor. To much more general analysis, every stage assumed to have a different coupling factor. The mismatches in LC tanks are considered as the main source of pha...
متن کاملThe Transient Behavior of LC and Ring Oscillators under External Frequency Injection
In this work, time domain analysis is used to solve Adler’s equation in order to obtain the required time, for an oscillator under external injection, reaching the steady-state condition. Mathematical approach has been applied to fully describe the transient of frequency acquisition in injection-locked LC and Ring oscillators considering their time-varying nature. Then, the analysis is verifie...
متن کاملA Phase Noise Reduction Technique in LC Cross-coupled Oscillators with Adjusting Transistors Operating Regions
In this paper, an intuitive analysis of a phase noise reduction technique is done, and then a modified structure is proposed to achieve higher phase noise reduction than the original one. This method reduces the impact of noise sources on the phase noise by decreasing closed-loop gain in zero-crossings points and moving this high closed-loop gain to the non-zero-crossings points. This reduction...
متن کاملPhysical Design and Simulation of an n stage Ring Oscillator using , 300 nm Technology
Voltage controlled Oscillators or Ring Oscillators are crucial components in any timing and memory circuits. The goal of this paper is to do physical design for a high speed, low power consumption multistage high performance ring oscillator circuit based on 300 nm CMOS technology which provides frequency of high order (KHz). This oscillator is used for high speed wireless communication applicat...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
عنوان ژورنال:
- Microelectronics Reliability
دوره 55 شماره
صفحات -
تاریخ انتشار 2015