Viscosity sensors for engine oil condition monitoring—Application and interpretation of results
نویسندگان
چکیده
There is an increasing demand for the on-line condition monitoring of lubricating oils. In our recent research, we considered various sensor principles for the on-line monitoring of thermal aging of engine oils. One of the investigated parameters is the viscosity of the lubricating oil, which can be efficiently measured using microacoustic sensors. Compared to conventional viscometers, these sensors probe a different rheological domain, which needs to be considered in the interpretation of the measurement results. This specific behavior is examined by s ©
منابع مشابه
Oil Quality Monitoring in Gasoline Spark Ignition Engine Using Oil Dielectric Measurement
Oil analysis is one of the main methods for monitoring the status of internal combustion engines and oils to ensure the lubricant's protective performance and engine health. This paper investigate oil condition monitoring in gasoline engine using oil dielectric coefficient measurement. At first capacitive sensor pectinate type is designed and manufactured that engine oil can pass through the se...
متن کاملOptimization of Online induction Sensor for Ferrous Metals Particles Identification in Engine Oil
Engine oil is one of most important parameters in internal combustion engine that plays effective role in component wear. One of the ways to optimize the performance of the IC engines is online monitoring of wear particle in engine oil. There are different ways to identifying these particles, most of which are offline. Nowadays online oil monitoring sensors are quickly developed. In this study ...
متن کاملInvestigation of shear stability of commercial polymer of viscosity index improver for determination of engine oil optimal formulation
The lubricating oils in each mechanical device are affected by shear forces. Polymers in lubricating oils engine, in particular, undergo many changes because of the influence of the applied forces. Awareness of these changes can help us to design optimal formulations. In this work, shear stability of four commercial was studied. Calculation of various parameters about viscosity in the enhancing...
متن کاملExamination of effects of multi-walled carbon nanotubes on rheological behavior of engine oil (10W40)
In this study, effects of multi walled carbon nanotubes and temperature on rheological behavior of engine oil (10W40) have been examined. For this purpose, the experiments were carried out in the temperature range of 5-55°C for several suspensions with solid volume fractions of 0.025%, 0.05%, 0.1%, 0.25%, 0.5% and 0.75%. The viscosity of all samples was measured in the shear rate range of 666s-...
متن کاملOn-line Condition Monitoring and Remote Fault Diagnosis for Marine Diesel Engines Using Tribological Information
Literature review indicates that a large amount of failures are caused by abnormal wear of the diesel engine components. It is therefore essential to monitor the engine condition using the tribological information. Although the wear debris analysis has been proven to be effective for condition monitoring and fault diagnosis (CMFD) of diesel engines, limited work has been done to address the rem...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
عنوان ژورنال:
دوره شماره
صفحات -
تاریخ انتشار 2005