A proposal of multiplace hyperbaric chamber for animal experimentation and veterinary use.

PURPOSE To develop a project of hyperbaric chamber that allows its safe and reliable use in veterinary and animal experimentation. METHODS Based on the technical specifications for the construction of hyperbaric chambers for human beings, it has been developed a design of a chamber with dimensions and characteristics for the use of a midsize animal, (dog or pig), as well as a multiple chamber for the use in small animals (mice, rats, hamsters, rabbits or cats). The technical specifications allowed that the chamber could be used both for veterinary use and for use in experiments on Health Sciences. RESULTS A chamber with the following characteristics was built: ASTM A36 steel for the manufacture of the master cylinder and rear cover; front door built in 5052 aluminum; internal diameter of 50.5 cm and 83.0 cm in length; weight 160Kg and internal area of 150cm(3); internal space to accommodate 2 acrylic baskets; 150mm high, 280mm wide and 690mm in length. It was capable of supporting a maximum of hydrostatic pressure test of 3.0 to 4.0 BAR ACT and maximum working pressure of 2.0 BAR or 3.0 ACT; equipped with security devices and valves that triggers with load of 2.2 BAR or 3.2 ACT. Tests for engineering and biological use on animals showed the effectiveness of the device. CONCLUSION The development of the project enabled the construction of a hyperbaric chamber with security features and reliability comparable to those required by the legal and technical specifications of a hyperbaric chamber human use.