A proposed classification of simulators.
نویسندگان
چکیده
This paper provides a coherent and comprehensive classification of simulators, using a five letter coding system, and is based on the characteristics of the user interface and the logic controller.
منابع مشابه
Simulation of a membrane air separation unit using industrial process simulators
Nowadays, membrane processes are widely used for high purity Nitrogen production. Separation of air by membranes is a flexible process in which the investment and operational costs are lower than for example adsorption or cryogenic processes. Such processes are based on relative permeability of air components which are transported by the pressure difference between two sides of the membrane. M...
متن کاملCompact Lossy Inductance Simulators With Electronic Control
In this paper two R‑L network simulator configurations employing a single VDDIBA, one resistance and one grounded capacitance are presented. The first configuration is a grounded series resistor-inductor (R‑L) network simulator and the second configuration is intended for grounded parallel resister-inductor (R‑L) circuit simulation. Both the proposed circuits enjoy several beneficial features s...
متن کاملDesigning a Fractional Order PID Controller for a Two-Area Micro-Grid under Uncertainty of Parameters
Increasing the number of microgrids has raised the complexity and nonlinearity of the power system and conventional controllers do not present acceptable efficiency in a wide range of operation points. In this study, a fractional order proportional–integral–derivative controller optimized with hybrid grey wolf-pattern search algorithm is used to control the frequency of each area of the microgr...
متن کاملEfficient Parameters Selection for CNTFET Modelling Using Artificial Neural Networks
In this article different types of artificial neural networks (ANN) were used for CNTFET (carbon nanotube transistors) simulation. CNTFET is one of the most likely alternatives to silicon transistors due to its excellent electronic properties. In determining the accurate output drain current of CNTFET, time lapsed and accuracy of different simulation methods were compared. The training data for...
متن کاملRobust Controller Design Based-on Aerodynamic Load Simulator Identification Driven by PMSM for Hardware-in-the-Loop Simulations
Aerodynamic load simulators generate the required time varying load to test the actuator’s performance in the laboratory. Electric Load Simulator (ELS) as one of variety of the dynamic load simulators should follows the rotation of the Under Test Actuator (UTA) and applies the desired torque to UTA’s rotor at the same time. In such a situation, a very large torque is imposed to the ELS from the...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
عنوان ژورنال:
- Middle East journal of anaesthesiology
دوره 20 2 شماره
صفحات -
تاریخ انتشار 2009