Comparison of Fuzzy Logic and Neural Network for Modelling Surface Roughness in Edm
نویسندگان
چکیده
Surface roughness is the main indicator of technological performances of a component for electrical discharge machining (EDM). EDM process of manganese alloyed cold-work tool steel was modelled. In this paper we used the fuzzy logic (FL) and neural network (NN) to predict the effect of machining variables (discharge current and pulse duration) on the surface roughness of manganese alloyed cold-work tool steel in order to improve and increase its range of application. The experiments are carried out on manganese alloyed cold-work tool steel, processed with electrodes made of copper. The values of surface roughness predicted by these models are then compared. All models show good agreement with experimental results. When compared to the NN and FL models, the NN model has shown a significant forecast improvement. The results indicate that the NN model is an effective algorithm to forecast the surface roughness in EDM.
منابع مشابه
پیش بینی زبری سطح در تراش کاری خشک به کمک شبکه های فازی- عصبی تطبیقی
Optimization of machining parameters is very important and the main goal in every machining process. Surface finishing prediction is a pre-requirement to establish a center for automatic machining operations. In this research, a neuro-fuzzy approach is used in order to model and predict the surface roughness in dry turning. This approach has both the learning capability of neural network and li...
متن کاملA comparison between knowledge-driven fuzzy and data-driven artificial neural network approaches for prospecting porphyry Cu mineralization; a case study of Shahr-e-Babak area, Kerman Province, SE Iran
The study area, located in the southern section of the Central Iranian volcano–sedimentary complex, contains a large number of mineral deposits and occurrences which is currently facing a shortage of resources. Therefore, the prospecting potential areas in the deeper and peripheral spaces has become a high priority in this region. Different direct and indirect methods try to predict promising a...
متن کاملPredictions of Tool Wear in Hard Turning of AISI4140 Steel through Artificial Neural Network, Fuzzy Logic and Regression Models
The tool wear is an unavoidable phenomenon when using coated carbide tools during hard turning of hardened steels. This work focuses on the prediction of tool wear using regression analysis and artificial neural network (ANN).The work piece taken into consideration is AISI4140 steel hardened to 47 HRC. The models are developed from the results of experiments, which are carried out based on De...
متن کاملPredicting Surface Roughness of AISI 4140 Steel in Hard Turning Process through Artificial Neural Network, Fuzzy Logic and Regression Models
In this study, the average surface roughness values obtained when turning AISI 4140 grade tempered steel with a hardness of 51 HRC, were modeled using fuzzy logic, artificial neural networks (ANN) and multi-regression equations. Input variables consisted of cutting speed (V), feed rate (f) and depth of cut (a) while output variable was surface roughness (Ra). Fuzzy logic and ANN models were dev...
متن کاملPrediction of Surface Roughness by Hybrid Artificial Neural Network and Evolutionary Algorithms in End Milling
Machining processes such as end milling are the main steps of production which have major effect on the quality and cost of products. Surface roughness is one of the considerable factors that production managers tend to implement in their decisions. In this study, an artificial neural network is proposed to minimize the surface roughness by tuning the conditions of machining process such as cut...
متن کامل