Robust multisensor fault tolerant model-following MPC design for constrained systems

نویسندگان

  • Alain Yetendje
  • María M. Seron
  • José A. De Doná
چکیده

In this paper, a robust fault-tolerant control strategy for constrained multisensor linear systems, subject to sensor faults and in the presence of bounded state and output disturbances, is proposed. The scheme verifies that, for each sensors–estimator combination, suitable residual variables lie inside pre-computed sets and selects a more appropriate combination based on a chosen criterion. An active fault tolerant output feedback controller yields an MPC-based control law and, by means of the notion of a “tube” of trajectories, we ensure robust closed-loop exponential stability and good performance in the fault-free case and under the occurrence of abrupt sensor faults.

برای دانلود رایگان متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Fault-tolerant Control for Constrained Linear Systems Based on Mpc and Fdi

This paper considers fault-tolerant control (FTC) for constrained linear systems subject to partial actuator failures. An active fault-tolerant control scheme based on model predictive control (MPC) and fault detection and isolation (FDI) is proposed. The FDI module using a two-stage Kalman filtering algorithm provides simultaneous control parameter and state estimation, which are used to modif...

متن کامل

Constrained Controller Design for Real-time Delay Recovery in Metro Systems

This study is concerned with the real-time delay recovery problem in metro loop lines. Metro is the backbone of public transportation system in large cities. A discrete event model for traffic system of metro loop lines is derived and presented. Two effective automatic controllers, linear quadratic regulator (LQR) and model predictive controller (MPC), are used to recover train delays. A newly-...

متن کامل

Fault Tolerant Model Predictive Control of Quad-Rotor Helicopters with Actuator Fault Estimation

Model predictive control (MPC) at each time step minimizes a cost function subject to dynamical constraints to obtain a stabilizing control signal. Further, MPC is one of the few methodologies that can be used to design feedback control for nonlinear dynamical systems taking into consideration of actuator saturations. It can thus serve as a suitable fault tolerant control approach for quad-roto...

متن کامل

Control Design of a Positioning System upon a Fault Tolerant Multisensor Scheme

The present paper deals with a fault tolerant control scheme for a multisensor plant under the assumption of bounded noises. A practical example, concerning a positioning system is detailed. Robust guarantees for the global stability of the system and the separability and identification of abrupt faults occurring in the sensor outputs are provided.

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

عنوان ژورنال:
  • Applied Mathematics and Computer Science

دوره 22  شماره 

صفحات  -

تاریخ انتشار 2012