Modulated Dsc Evaluation of Isothermal Cure & Vitrification for Thermosetting Systems
نویسنده
چکیده
منابع مشابه
Chemical and Physical Interpretation of Mdi Cure in Saturated Steam Environments
The cure of polymeric 4-4’ diphenyhnethane diisocyanate, PMDI, in wood composite manufacturing has been the subject ‘of much research. The exact .contribution of polyurethane, polyurea, and polyurete formation to PMDI/wood bonding is still debated. This study foregoes the mechanism controversy and studies the cure from a panel consolidation process. Micro-dielectric analysis, JJDEA, was ut i l ...
متن کاملCharacterization of low-k benzocyclobutene dielectric thin film
This paper reports the characterization of a photosensitive benzocyclobutene (BCB), a low dielectric constant spin-on polymer for use as interlayer dielectric in the microelectronics industry. Research work is divided into three main sections. First, BCB thin film characterization was done to investigate the effects of curing conditions on BCB film thickness, dielectric properties, optical prop...
متن کاملSeparation of Gelation From Vitrification in Curing of a Fiber - Reinforced Epoxy Composite
Prepregs of a mixture of the tetrafunctional epoxy tetraglycidyl 4.4-diaminodiphenyl methane (TGDDM) and the tetrafunctional amine 4.4'-diaminodiphenylsulfone (DDS) were characterized with temperature-modulated DSC (TMDSC) as well as dynamic mechanical analysis (DMA). The baseline shift of the glass transition was separated from the curing exotherm by using temperature-modulated and step scan D...
متن کاملThermal Rheological Analysis of Cure Process of Epoxy Prepreg
The cure process of epoxy prepreg used as composite pipe joints was studied by means of differential scanning calorimetry (DSC), Bohlin Rheometer and other techniques. Isothermal DSC measurements were conducted between 110 and 220 C, at 10 C intervals. The results show that the complete cure reaction could be achieved at 220 C. The isothermal cure process was simulated with the four-parameter a...
متن کاملEffects of graphene oxides on the cure behaviors of a tetrafunctional epoxy resin
The influence of graphene oxides (GOs) on the cure behavior and thermal stability of a tetrafunctional tetraglycidyl-4,4’-diaminodiphenylmethane cured with 4,4’-diaminodiphenylsulfone was investigated by using dynamic differential scanning calorimetry (DSC) and thermogravimetric analysis (TGA). The dynamic DSC results showed that the initial reaction temperature and exothermal peak temperature ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
عنوان ژورنال:
دوره شماره
صفحات -
تاریخ انتشار 1997