Quantum Electronics Letters Output Characteristics of a Corona - Preionized XeCl Laser
نویسنده
چکیده
The output characteristics of a corona-preionized XeCl laser are described. Measurements in an He-based mixture up to 5 bars and in an Ne-based mixture up to 10 bars are presented. The maximum obtained output energy per unit volume is more than 9 Jll.
منابع مشابه
High-Pressure Behaviour of an X-Ray Preionized Discharge Pumped XeC1 Laser
The output characteristics are described of an X-ray preionized discharge pumped XeC1 laser, fed by a low-impedance pulse forming line (PFL), at pressures up to 12 bar. The influence of a multichannel rail gap placed between the PFL and the laser head on the output energy was studied. We found an increase of output energy with increasing pressure up to 8 bar. At higher pressures a saturation be...
متن کاملFormation of different microstructures on a polyethersulfone film following XeCl laser irradiation
Laser irradiation parameters, especially the laser fluence and the number of pulses are very important factors affecting microstructures formation and improvement of the surface characteristics in different medical, electronic and the other industrial applications. Information about the fluence domain and the number of pulses for the formation of the structures is very important and determines ...
متن کاملEnhanced Modulation and Noise Characteristics in 1.55 µm QD Lasers using Additional Optical Pumping
The modulation response, relative intensity noise (RIN) and frequency noise (FN) characteristics of quantum dot (QD) lasers are investigated theoretically in the presence of an external optical beam. Using small signal analysis of the rate equations for carriers and photons, it is demonstrated that by injecting excess carriers into the QDs excited state through optical pumping, the modulation r...
متن کاملEffect of variation of specifications of quantum well and contact length on performance of InP-based Vertical Cavity Surface Emitting Laser (VCSEL)
Abstract: In this study, the effects of variation of thickness and the number of quantumwells as well as the contact length were investigated. In this paper, a vertical cavity surfaceemitting laser was simulated using of software based on finite element method. Thenumber of quantum wells was changed from 3 to 9 and the results which are related tooutput power, resonance ...
متن کاملpH Effect on the Size of Graphene Quantum dot Synthesized by Using Pulse Laser Irradiation
In this study graphene oxide (GO) was synthesized by using Hummer’s method. Low dimension graphene quantum dot nanoparticles (GQDs) were synthesized using pulse laser irradiation. Fourier Transform-Infrared Spectroscopy (FTIR), Ultraviolet-Visible (UV-Vis) spectroscopy and photoluminescence (PL) analysis were applied to study the GQDs characteristic. Scanning electron microscopy illustrated the...
متن کامل