Nanoscale multifunctional sensor formed by a Ni nanotube and a scanning Nb nanoSQUID
نویسندگان
چکیده
J. Nagel,1 A. Buchter,2 F. Xue ( ),2 O. F. Kieler,3 T. Weimann,3 J. Kohlmann,3 A. B. Zorin,3 D. Rüffer,4 E. Russo-Averchi,4 R. Huber,5 P. Berberich,5 A. Fontcuberta i Morral,4 D. Grundler,5,6 R. Kleiner,1 D. Koelle,1,* M. Poggio,2 and M. Kemmler1 1Physikalisches Institut and Center for Collective Quantum Phenomena in LISA+, Universität Tübingen, Auf der Morgenstelle 14, D-72076 Tübingen, Germany 2Department of Physics, University of Basel, Klingelbergstrasse 82, CH-4056 Basel, Switzerland 3Fachbereich 2.4 “Quantenelektronik”, Physikalisch-Technische Bundesanstalt, Bundesallee 100, 38116 Braunschweig, Germany 4Laboratoire des Matériaux Semiconducteurs, Institut des Matériaux, Ecole Polytechnique Fédérale de Lausanne, CH-1015 Lausanne, Switzerland 5Lehrstuhl für Physik funktionaler Schichtsysteme, Physik Department E10, Technische Universität München, 85747 Garching, Germany 6Institut des Matériaux, Faculté Sciences et Technique de l’Ingénieur, Ecole Polytechnique Fédérale de Lausanne, 1015 Lausanne, Switzerland (Received 28 February 2013; revised manuscript received 4 July 2013; published 29 August 2013)
منابع مشابه
Catalyst of Ni and Co dependencies for carbon nanotube synthesis by CVD method
In this research, the effect of catalyst type on the CNTs synthesis was investigated. The carbonnanotubes (CNTs) were produced on stainless steel substrates and two of catalyst with differentcharacteristics by using Thermal chemical vapor deposition (TCVD) method. The catalysts have theimportant role for the growth carbon nanotubes (CNTs). Acetylene gas (C2H2) diluted by NH3 wasused as the reac...
متن کاملMicrostructural study of Ti/3YSZ interface in NI 105/Ni/Nb/Ti/3YSZ diffusion bonding
In this research, the diffusion bonding of the stabilized zirconia ceramic and Nimonic 105 superalloy using Ti/Nb/Ni multi-interlayer was carried out. Joint was performed using the plasma spark technique in a vacuum atmosphere and at different temperatures and times. The microstructure of the different joint zones was studied using optical and FESEM microscopes equipped with an EDS analyzer. Th...
متن کاملارزیابی ریزساختاری آلیاژ Ni-Nb-Si در حین فرایند آلیاژسازی مکانیکی
In the present study, the mechanical alloying process was used to produce the Ni-Nb-Si amorphous alloy. X-ray diffraction (XRD)analysis and high-resolution transmission electron microscopy (HRTEM) were used to approve the amorphous phase formation after 12 hours of mechanical alloying. The results obtained from the SEM morphological images of powder particles during mechanical alloying showed t...
متن کاملSelf-aligned nanoscale SQUID on a tip.
A nanometer-sized superconducting quantum interference device (nanoSQUID) is fabricated on the apex of a sharp quartz tip and integrated into a scanning SQUID microscope. A simple self-aligned fabrication method results in nanoSQUIDs with diameters down to 100 nm with no lithographic processing. An aluminum nanoSQUID with an effective area of 0.034 microm2 displays flux sensitivity of 1.8 x 10(...
متن کاملSynthesis and Growth Mechanism of Ni Nanotubes and Nanowires
Highly ordered Ni nanotube and nanowire arrays were fabricated via electrodeposition. The Ni microstructures and the process of the formation were investigated using conventional and high-resolution transmission electron microscope. Herein, we demonstrated the systematic fabrication of Ni nanotube and nanowire arrays and proposed an original growth mechanism. With the different deposition time,...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
عنوان ژورنال:
دوره شماره
صفحات -
تاریخ انتشار 2013