Influence of surface modification on catalytic activity of activated carbon toward decomposition of hydrogen peroxide and 2-chlorophenol.
نویسندگان
چکیده
The objective of this research was to investigate the influence of the activated carbons modified by chemical treatment on the surface catalyzed loss of H2O2 and 2-CP. The characteristics of the modified activated carbons were examined by several techniques including nitrogen adsorption, SEM, and EDS. The H2O2 decomposition rate would be suppressed significantly either by the change of surface properties modified with chemical treatment or the reduction of active sites occupied with the adsorption of 2-CP. In addition, the H2O2 decomposition rate with activated carbons within a specific time can be described by a second-order kinetic expression with respect to the concentration of GAC and H2O2 in the absence or presence of 2-CP. The catalytic activities of the three activated carbons toward 2-CP reduction followed the inverse sequence of those toward H2O2 loss, implying that acidic surface functional group could retard the H2O2 loss and reduce the effect of surface scavenging resulting in increasing the reduction efficiency of 2-CP. By the detection of chloride ions in reaction mixture, it can be demonstrated that the reduction of 2-CP was not only attributed to the advanced adsorption but also the oxidation of the 2-CP with effective radicals. The real oxidation efficiency of 2-CP for the activated carbon modified with hot nitric acid was observed between 0.04 and 0.01 (mol/mol), offering a comparable efficiency to that of the other oxidation system using metal oxide as catalyst.
منابع مشابه
Catalytic decomposition of hydrogen peroxide and 4-chlorophenol in the presence of modified activated carbons.
The objective of this research was to examine the heterogeneous catalytic decomposition of H(2)O(2) and 4-chlorophenol (4-CP) in the presence of activated carbons modified with chemical pretreatments. The decomposition of H(2)O(2) was suppressed significantly by the change of surface properties including the decreased pH(pzc) modified with oxidizing agent and the reduced active sites occupied b...
متن کاملPreparation of Promoted Ni0.1Co0.9Fe2O4 Ferrite Nanoparticles and Investigation of Its Catalytic Activity on Decomposition of H2O2 and Optical Characterization of Pure Ni0.1Co0.9Fe2O4
Pure and ZnO-doped Ni0.1Co0.9Fe2O4 catalyst were prepared by co-precipitation method and thermal decomposition in air calcinated at 400-700°C and that treated with different amounts of zinc nitrate (0.46-2.25 w% ZnO). X-ray powder diffractometry, scanning electron microscopy (SEM) and BET analysis of nitrogen adsorption isotherms investigated the crystalline bulk structure and the surface area ...
متن کاملPreparation of Promoted Ni0.1Co0.9Fe2O4 Ferrite Nanoparticles and Investigation of Its Catalytic Activity on Decomposition of H2O2 and Optical Characterization of Pure Ni0.1Co0.9Fe2O4
Pure and ZnO-doped Ni0.1Co0.9Fe2O4 catalyst were prepared by co-precipitation method and thermal decomposition in air calcinated at 400-700°C and that treated with different amounts of zinc nitrate (0.46-2.25 w% ZnO). X-ray powder diffractometry, scanning electron microscopy (SEM) and BET analysis of nitrogen adsorption isotherms investigated the crystalline bulk structure and the surface area ...
متن کاملCatalytic Decomposition of Hydrogen Peroxide in the Presence of Synthesized Iron-Manganese oxide Nanocomposites via Different Methods
The special application of iron-manganese oxide nanocatalysts has been investigated in decomposition of hydrogen peroxide. In this research, iron-manganese oxide nanocomposites were synthesized by co-precipitation, sol-gel and mechanochemical methods using iron (III) nitrate, iron (II) sulfate and manganese (II) nitrate as starting materials. These nanocomposites were prepared on the variou...
متن کاملCatalytic Decomposition of H2O2 on MnFe2O4 Nanocomposites Synthesized by Various Methods in the Presence of Silicate and Zeolite Supports
In this research iron manganese oxide nanocomposites were prepared by co-precipitation, sol-gel and mechanochemical methods by using iron (III) nitrate, iron (II) sulfate and manganese (II) nitrate as starting materials. These nanocomposites were prepared in the presence of various catalyst beds. The polyvinyl pyrrolidon (PVP) was used as a capping agent to control the agglomeration of the nano...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
عنوان ژورنال:
- Journal of environmental science and health. Part A, Toxic/hazardous substances & environmental engineering
دوره 38 7 شماره
صفحات -
تاریخ انتشار 2003