Analysis of "Teno-uchi" maneuver in releasing Japanese-style bows based on muscle activities and forces acting on the bow.
نویسندگان
چکیده
Since a Japanese-style bow has a very complicated shape and structure, an archer has to apply the "Teno-uchi" maneuver including horizontally twisting torque, or "Nejiri", and sagittally down-pushing torque, or "Uwa-oshi", to the restoring bow in order to hit the target. The purpose of this study was to investigate the biomechanical relationship between the muscular activities of the left forearm and the operation of "Teno-uchi" maneuver. Surface EMG of left forearm muscles and the two kinds of torque acting on the bow around the time of release were recorded in 10 experienced subjects during arrow shooting. The "Biku", an involuntary resignation from release happening in the shooting, was also examined. Close analyses of the results revealed that activation of the extensor carpi ulnaris and extensor digitorum muscles together with inhibition of the flexor carpi ulnaris muscle brought about "Nejiri", while activation of the extensor carpi ulnaris as well as flexor carpi ulnaris muscles and inhibition of the extensor carpi redialis longus and extensor digitorum muscles gave rise to "Uwa-oshi", thus causing activities of trade-off nature in the extensor digitorum and flexor carpi ulnaris muscles for the "Nejiri" and "Uwa-oshi. The trade-off activities were presumably actualized through time-sharing coordination between the muscles.
منابع مشابه
Estimation of spinal loads using a detailed finite element model of the L4-L5 lumbar segment derived by medical imaging kinematics; a feasibility study
Introduction: Low back pain is the most prevalent orthopedic disorder and the first main cause of poor working functionality in developed as wells as many developing countries. In Absence of noninvasive in vivo measurement approaches, biomechanical models are used to estimate mechanical loads on human joints during physical activities. To estimate joint loads via musculoskelet...
متن کاملThe violin bow: taper, camber and flexibility.
An analytic, small-deflection, simplified model of the modern violin bow is introduced to describe the bending profiles and related strengths of an initially straight, uniform cross-section, stick as a function of bow hair tension. A number of illustrative bending profiles (cambers) of the bow are considered, which demonstrate the strong dependence of the flexibility of the bow on longitudinal ...
متن کاملObservations on the dynamic properties of violin bows
Some of the dynamic properties of violin bows have been studied. The normal modes of the bow stick and assembled bow, respectively, have been explored by modal analysis. Modefiequencies and damping ratios have been compared for a set of bows which had ratings rangzng fiom poor to excellent, assigned to them by professional players, and an attempt has been made to connect the modal properties wi...
متن کاملAnalysis of Stresses in Helicopter Composite blade in Hovering Maneuver
The main purpose of this article is the structural analysis of a composite blade of a selected helicopter. In this study, the stresses on rotors' blades caused by centrifugal forces, lift, drag and torque are analyzed. The governing equations of the structure behavior and solving processes were carried out by MATLAB software, and simulation is carried out by ABAQUS software, and they are compar...
متن کاملA predictive model for the adjustment of violin bows
A finite element model aimed at predicting the in-plane and out-of-plane static mechanical behavior of a tightened bow is developed. It takes into account the prestress due to hair tension and the nonlinear behavior due to large displacements. An non-destructive procedure to determine the input parameters of the model from measurements on a bow is described. Numerical and experimental results a...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
عنوان ژورنال:
- Journal of human ergology
دوره 33 1-2 شماره
صفحات -
تاریخ انتشار 2004