The Specific Heat Capacity of Adsorbate-Adsorbent System
نویسندگان
چکیده
منابع مشابه
Numerical Modelling of Flow and Coupled Mass and Heat Transfer in an Adsorption Process
In this paper, a detailed 3D modelling of flow and coupled heat and mass transport in a channel coated with adsorbing material is presented. A comparative study between a simplified 1D model and the detailed 3D model is carried out. Both 3D and 1D predictions are compared with experimental data available from literature as well. The time-dependent variation of temperature and heat flux distribu...
متن کاملCroatica Chemica Act a Ccacaa
In a previous work, simultaneous heat and mass transfer between a freely moving object and a gas fluidized bed of adsorbent particles were investigated. Sublimation of naphthalene spheres into a 13X molecular sieve bed was used as amodel system.P In an attempt to give an interpretation of these experimental data, the isotherms and the adsorption heat of this adsorbent/adsorbate pair have been d...
متن کاملAbsorption Property of Polyamide Nanofibrous Membrane on Dyestuff for Purifying Wastewater
The aim of this study was to examine the use of polyamide 6 nanofibers as an adsorbent material for removal of dye on textile wastewater. Simulated wastewater of acid dye (namely Color Index Acid blue 41) was used for experiment test with concentration of 0.01, 0.02 and 0.03g/L. Two kinds of electrospun polyamide 6 nanofibrous membranes with weight per unit area respectively 1.0 and 2.9g/m2 wer...
متن کاملVolumetric interpretation of protein adsorption: capacity scaling with adsorbate molecular weight and adsorbent surface energy.
Silanized-glass-particle adsorbent capacities are extracted from adsorption isotherms of human serum albumin (HSA, 66 kDa), immunoglobulin G (IgG, 160 kDa), fibrinogen (Fib, 341 kDa), and immunoglobulin M (IgM, 1000 kDa) for adsorbent surface energies sampling the observable range of water wettability. Adsorbent capacity expressed as either mass-or-moles per-unit-adsorbent-area increases with p...
متن کاملCoexisting arsenate and arsenite adsorption from water using porous pellet adsorbent: Optimization by response surface methodology
Mesoporous pellet adsorbent developed from mixing at an appropriate ratio of natural clay, iron oxide, iron powder, and rice bran was used to investigate the optimization process of batch adsorption parameters for treating aqueous solution coexisting with arsenate and arsenite. Central composite design under response surface methodology was applied for optimizing and observing both individual a...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
عنوان ژورنال:
دوره شماره
صفحات -
تاریخ انتشار 2014