Solving the Problem of Building Models of Crosslinked Polymers: An Example Focussing on Validation of the Properties of Crosslinked Epoxy Resins
نویسندگان
چکیده
The construction of molecular models of crosslinked polymers is an area of some difficulty and considerable interest. We report here a new method of constructing these models and validate the method by modelling three epoxy systems based on the epoxy monomers bisphenol F diglycidyl ether (BFDGE) and triglycidyl-p-amino phenol (TGAP) with the curing agent diamino diphenyl sulphone (DDS). The main emphasis of the work concerns the improvement of the techniques for the molecular simulation of these epoxies and specific attention is paid towards model construction techniques, including automated model building and prediction of glass transition temperatures (T(g)). Typical models comprise some 4200-4600 atoms (ca. 120-130 monomers). In a parallel empirical study, these systems have been cast, cured and analysed by dynamic mechanical thermal analysis (DMTA) to measure T(g). Results for the three epoxy systems yield good agreement with experimental T(g) ranges of 200-220°C, 270-285°C and 285-290°C with corresponding simulated ranges of 210-230°C, 250-300°C, and 250-300°C respectively.
منابع مشابه
Designed-in Molecular Interactions Lead to Superior Thermo-mechanical Properties in Nanocomposites
The effect of the nanofiller chemistry on the mechanical behaviour of thermoset polymer matrix nanocomposites is investigated. The interaction between a crosslinked polymer resin and the reinforcing nanofibers driven by their chemistry is revealed by molecular dynamics simulations. Specifically, crosslinked network systems of neat epoxy and epoxy-P(St-co-GMA) are modeled to discuss the effect o...
متن کاملAtomistic Modeling of Cross-linked Epoxy Polymer
Molecular Dynamics simulations are used to study cross-linking of an epoxy polymer. OPLS force field parameters are used for modeling a 2:1 stoichiometric mixture of epoxy resin and the cross-linking agent. The model has 17,928 united atoms and a static cross-linking method is used along with molecular minimization and molecular dynamics techniques to achieve two different cross-link densities....
متن کاملMolecular modeling of crosslink distribution in epoxy polymers
Experimental studies on epoxies report that the microstructure consists of highlycrosslinked localized regions connected with a dispersed phase of low-crosslink density epoxy. Because epoxies play a major role in many structural applications, the influence of the crosslink distribution on the thermo-mechanical properties must be determined. But as experiments cannot reliably report the exact nu...
متن کاملMechanical Properties and Morphologies of Carboxyl-Terminated Butadiene Acrylonitrile Liquid Rubber/Epoxy Blends Compatibilized by Pre-Crosslinking
In order to enhance the compatibilization and interfacial adhesion between epoxy and liquid carboxyl-terminated butadiene acrylonitrile (CTBN) rubber, an initiator was introduced into the mixture and heated to initiate the cross-linking reaction of CTBN. After the addition of curing agents, the CTBN/epoxy blends with a localized interpenetrating network structure were prepared. The mechanical p...
متن کاملStudy of different methods to induce crosslinking of polyacrylamide for agriculture process
The present study describes two different methods for the preparation of superabsorbent polyacrylamide (PAAm) hydrogels for application in farming of sandy soil. The two methods were employed to induce the crosslinking of the polymer matrix. In the first method a PAAm paste was exposed to gamma rays, while in the second method the polymer was thermally treated in the solid phase. Crosslinked PA...
متن کامل