Origin of valence and core excitations in LiFePO(4) and FePO(4).
نویسندگان
چکیده
Electronic structures of LiFePO(4) and FePO(4) have been investigated using valence and core electron energy loss spectroscopy (EELS) supported by ab initio calculations. Valence electron energy loss spectra of FePO(4) are characterized by interband transitions found between 0 and 20 eV, which are not observed in LiFePO(4). Spectra are fully analysed using band structure calculations and calculated dielectric functions. In particular, we show that interband transitions observed in FePO(4) spectra originate from the states at the top of the valence band, which have mainly oxygen p character. From core-loss EELS, it is observed that the O-K edge in FePO(4) has a pre-edge peak below the threshold of the main O-K edge. This pre-edge peak is not observed in the O-K spectra of LiFePO(4). The position of the pre-edge peak is determined by a charge transfer process, which shifts the position of the iron 3d bands with respect to the conduction band. The intensity of the pre-edge peak is also determined by the changes in the hybridization of iron 3d and oxygen states as a result of extraction of lithium ions from the LiFePO(4) lattice. We show that the extraction of lithium ions from LiFePO(4) results in large changes in the electronic structure, such that FePO(4) can be considered to be a charge transfer insulator while LiFePO(4) is a typical Mott-Hubbard insulator.
منابع مشابه
In Situ Atomic-Scale Imaging of Phase Boundary Migration in FePO
Orthorhombic Li x FePO 4 (0 ≤ x ≤ 1) system has attracted much attention for its application as a high power cathode material in lithium ion batteries. [ 1 ] Although the performance of this material has been greatly improved by cation doping, surface coating and size reduction, [ 2–4 ] the fundamental phase transformation mechanisms accompanying lithiation/delithiation are still controversial....
متن کاملKinetics of non-equilibrium lithium incorporation in LiFePO4.
Lithium-ion batteries are a key technology for multiple clean energy applications. Their energy and power density is largely determined by the cathode materials, which store Li by incorporation into their crystal structure. Most commercialized cathode materials, such as LiCoO(2) (ref. 1), LiMn(2)O(4) (ref. 2), Li(Ni,Co,Al)O(2) or Li(Ni,Co,Mn)O(2) (ref. 3), form solid solutions over a large conc...
متن کاملSuppression of phase separation in LiFePO₄ nanoparticles during battery discharge.
Using a novel electrochemical phase-field model, we question the common belief that Li(X)FePO(4) nanoparticles always separate into Li-rich and Li-poor phases during battery discharge. For small currents, spinodal decomposition or nucleation leads to moving phase boundaries. Above a critical current density (in the Tafel regime), the spinodal disappears, and particles fill homogeneously, which ...
متن کاملHighly ordered staging structural interface between LiFePO4 and FePO4.
A highly ordered interface between LiFePO(4) phase and FePO(4) phase with staging structure along the a axis and perpendicular to the b axis direction has been observed for the first time, in a partially chemically delithiated Li(0.90)Nb(0.02)FePO(4) by advanced aberration-corrected annular-bright-field (ABF) scanning transmission electron microscopy (STEM).
متن کاملDeformation Performance of the Karkheh Earth Dam with Mixed and Pure Clay Coreunder Seismic Excitations
The number of constructed dams has been largely increased due to high demands of water supplies, and earth dams are the most common types since they are more compatible to the environment. Nevertheless, the stability of these important structures during earthquakes has to be carefully evaluated and guaranteed. In the past, earth dams usually designed with pure clay core, but in recent decades t...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
عنوان ژورنال:
- Journal of physics. Condensed matter : an Institute of Physics journal
دوره 22 27 شماره
صفحات -
تاریخ انتشار 2010