An electromechanical transfer circuit to measure individual battery voltages in series packs
نویسندگان
چکیده
An electromechanical transfer circuit to measure individual battery voltages in series packs Abhiman Hande a,∗, Sukumar Kamalasadan b a Erik Jonsson School of Engineering and CS, University of Texas at Dallas, P.O. Box 830688, EC33, Richardson, TX 75083, United States b Division of Engineering and Computer Technology, University of West Florida, Building 77, Room 131F, Pensacola, FL 32514, United States
منابع مشابه
AN1333: Designing Multi-Cell Li-ion Battery Packs Using the ISL9208 Analog Front End
This application note discusses some of the hardware and software design decisions and shows how to select external components for a multi-cell Li-ion battery pack using a microcontroller and the ISL9208 analog front end. A microcontroller provides the primary control of the operation of the battery pack. However, several factors in the multi-cell series Li-ion pack require the use of circuitry...
متن کاملA Fast Multi-Switched Inductor Balancing System Based on a Fuzzy Logic Controller for Lithium-Ion Battery Packs in Electric Vehicles
Based on a low cost multi-switched inductor balancing circuit (MSIBC), a fuzzy logic (FL) controller is proposed to improve the balancing performances of lithium-ion battery packs instead of an existing proportional-integral (PI) controller. In the proposed FL controller, a cell’s open circuit voltages (OCVs) and their differences in the pack are used as the inputs, and the output of the FL con...
متن کاملLarge Lithium Polymer Battery Modeling for the Simulation of Hybrid Electric Vehicles Using the Equivalent Circuit Method
In the present study, a model of a large Lithium Polymer (Li-Po) battery for use in the simulation of Hybrid Electric Vehicles (HEVs) is developed. To attain this goal, an Equivalent Circuit (EC) consisting of a series resistor and two RC parallel networks is considered. The accuracy and the response time of the model for use in an HEV simulator are studied. The battery parameters identifica...
متن کاملStudying lithium-ion battery packs cooling system using water-nanofluids composition
In this study, the Li-ion batteries temperature increase during the discharge process was measured empirically and evaluated using numerical simulation. Moreover, the battery packs cooling using the water, air and water-nano composition fluids such as water-alumina, water-copper oxide, and water-gold was studied through numerical simulation. Accordingly, the battery cooling was simulated by CFD...
متن کاملAn Approach for Designing Thermal Management Systems for Electric and Hybrid Vehicle Battery Packs
If battery packs for electric vehicles (EVs) and hybrid electric vehicles (HEVs) are to operate effectively in all climates, thermal management of the packs is essential. In this paper, we will review a systematic approach for designing and evaluating battery pack thermal management systems. A thermal management system using air as the heat transfer medium is less complicated than a system usin...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
عنوان ژورنال:
دوره شماره
صفحات -
تاریخ انتشار 2006